Equipment for the production of poles and piles of long length, Stalpi BFS, Kyiv

Equipment for the production of long prestressed posts and piles, Stalpi BFS.

BFS equipment is the way to your success, It is the technology leader in the world.

Technology of centrifugation of prefabricated reinforced concrete pillars, BFS

Decades of experience and knowledge of BFS engineers, as well as continuous improvement of BFS precast concrete column centrifugation technologies, find ideal application in the production of these products. Taking advantage of the spin and pre-stressing process, posts and piles made on BFS equipment have maximum density, minimum weight and the best strength-to-weight ratioweight. This is guaranteed by more than 50 years of experience in this field and the production of modern centrifugation equipment.

Column centrifugation technology.

the production of power cable supports, park lighting supports, decorative street lighting poles, etc. is used.

The use of biconical forms allows you to significantly increase productivity, since two or more products can be formed per cycle. The degree of automation can be adapted to the needs of the customer in terms of productivity and flexibility.

Products produced by the technology of centrifugation and vibroimmersion of concrete:

- Reinforced concrete and prestressed concrete pillars and piles

- Power transmission lines, Poles, electrification of railways

- Decorative lighting supports

- Telecommunication towers

- Precast and prestressed piles

BFS pile centrifugation technology.

Precast centrifugal piles are used for soil reinforcement, building foundations, marine and land structures, and for other purposes.

BFS vibration sealing technology.

The BFS system also allows the manufacture of concrete columns, pillars and piles by the method of vibration compaction in accordance with specific requirements.

Main characteristics:

Production range: outer diameter from 300 to 800 mm.
The length of the products is from 6 m to 50 meters.
Biconical forms for two or more products in each.
Forming process with PLC control.
Quick opening and closing of forms.
System of rapid pouring of concrete.
Shapes of conical columns: round, square, hexagonal, octagonal, fluted, bell-shaped, decorative, any regular geometric cross-section.

Production of concrete pillars using vibration technology.

Columns, posts and piles can also be produced by vibration technology according to special requirements.

Production technology of prefabricated concrete piles:

Piles are used for soil reinforcement, foundations of buildings, marine and land structures.

They have the following main characteristics:

Diameter from outer diameter 300–800 mm (option – 150 to 2000 mm)
Length from 6 to 50 meters.
Prestressed or reinforced
Conical or cylindrical whole piles
Cylindrical component piles
Square/octagonal component piles
Micropiles, I-beam piles

Bioconical molds for 2 or more products in each mold

Forming process controlled by PLC

Quick opening and closing of forms

Fast concrete pouring system

Various forms of conical pillars: round, square, hexagonal, octagonal, fluted, bell-shaped, decorative forms of any correct geometric cross-section.

Tell us about your needs - and we will design, deliver and commission your object!

BFS systems for the production of poles.

- Form for manufacturing a support by the centrifugation method with reinforcement

- The process of extracting the support by the spinning method

- Form for making a decorative support by the centrifugation method

- Form for manufacturing a support by the centrifugation method with longitudinal wire preload

BFS-Systems for the production of supports:

Decorative support pole made on BFS Spun Pole equipment

Decorative support pillar(//tractor-service.com)

Detail of the lower part of the lighting support

Composition of electrical supports

Detail of an electric support support by the centrifugation method

BFS systems for the production of supports

Prefab form for centrifuge support

"Spinning" machine for wire

Concrete supply unit

The shape of a centrifuge support on a centrifugal machine

Automatic decking unit

BFS systems for piles and columns

40-meter concrete pile

The shape of a centrifuged pile on a centrifugal machine

A concrete pile used to support a port platform

Pile bending station

Ready-made products from concrete piles

Transport crane for a 40-meter pile

Key benefits:

Advanced pole spinning technology

Advanced Pole Spinning Technology BFS

Pillars of P.S.C.

A legacy of pipe innovation

Decades of experience and knowledge of BFS engineers, as well as constant improvement of BFS concrete centrifugation technologies, find ideal application in the production of these products. Thanks to centrifugal molding and prestressing technology, posts and piles manufactured on BFS equipment have maximum density, minimum weight and the best strength-to-weight ratio.

This is guaranteed by more than 50 years of experience in this field and the production of modern equipment for centrifugal forming.

Production technology of prefabricated and prestressed centrifugal columns:

This technology is used for power line lighting systems, park lighting, decorative poles for street lighting.

Production of prefabricated and prestressed reinforced concrete pillars by vibropressing:

Columns, posts and piles are made by vibropressing of any regular shape with a hollow core or a full section. The following shapes of conical pillars are available: round, square, hexagonal, octagonal, fluted, bell-shaped and many other decorative shapes.

Centrifugation technology of precast concrete piles:

Centrifugation of piles is used for soil reinforcement, foundations of buildings, marine and land structures.

Main characteristics:

The diameter of lighting devices is from 150 to 2000 mm and more.
Length from 6 to 50 meters.

Form for decorative centrifugal columns.

The use of biconical forms allows you to significantly increase productivity, since 2 or more products can be formed per cycle. The degree of automation can be improved according to the customer's requirements in terms of productivity and flexibility to produce products of different sizes in one cycle.

Main characteristics:

Production range: outer diameter from 300 to 1200 mm.
The length of individual products is from 6 to 50 meters.
Biconical forms for two or more products in one form.
The forming process is controlled by a PLC.
Quick opening and closing of forms.
System of quick pouring of concrete.
Forms of conical pillars:
round, square, hexagonal, octagonal, fluted, bell-shaped, decorative, any regular geometric cross-section.

Prestressed or reinforced
Conical or cylindrical whole piles
Cylindrical component piles
Square/octagonal component piles
Micropiles, I-beam piles

Our professionals save your time and money.

Afinitas combines the engineering potential and technical expertise of the proven HawkeyePedershaab and BFS teams.

Our global reach and deep knowledge guarantee smooth operation and useful advice to achieve optimal and effective results.