Primer bituminous ECOBYT bucket 3, 0 l DSTU B V.2.7-108-2001 (GOST 30693-2000), Dnipropetrovsk region.

Mastic primer bitumen EKOBIT bucket 3.0 l DSTU B V.2.7-108-2001 (GOST 30693-2000) It is intended for the preparation (priming) of high-quality gluing of various waterproofing materials to porous, rough and dusty surfaces.

Appointment:
— applying a primer layer before applying "Bitelast" mastic

Properties:
— is a thick mass ready for use, which should be mixed if necessary;
— has good adhesion to horizontal and vertical surfaces;

Application:
The surface must be cleaned of loose, broken elements, dirt and dust. Mastic is applied to a dry surface with a roller, brush, spatula, at an ambient temperature of no lower than 0° C.
Mastic consumption 0.2 kg/m2. The drying time of each layer with a thickness of 1 mm depends on the temperature of the medium and varies from 1 to 24 hours.

Product description
Bituminous primer is used to prepare (primer) a rough or porous, rusty and dusty surface for gluing different waterproofing materials. Does not require preheating. Can be used in all climatic zones in accordance with SNiP 23-01.

Primer is a solution of bitumen in an organic solvent. You can buy ready-to-use construction material or concentrate from us.

Bituminous primer, which you can buy in our online store at a low price, is used for the following works:(//tractor-service.com)

repair and installation of a soft roof;

waterproofing of the floor, foundation, based on concrete, etc.

It can be used as a temporary waterproofing of various construction structures.

Advantages of the material
The consistency and composition of the bituminous primer are designed in such a way as to allow it to penetrate as deeply as possible into irregularities, surface cracks and pores, filling them and simultaneously binding dust particles, etc., located on the surface. The primer perfectly moistens materials of different composition and density. It is suitable for preparing such surfaces as brick, metal, concrete and other mineral materials of natural origin.

The primer dries quickly enough and provides good, reliable adhesion of the waterproofing to the base. Thanks to it, the layer of waterproofing will last without restorative repair for a long time.

Application method
Depending on the volume of work and the surface to be primed, the primer is applied with a roller, brushes, spatula or in bulk with subsequent leveling with scrapers.

Bituminous primer (primer) has a flow rate of 0.3 liters per 1 m2. The consumption depends on the thickness of the material application, the degree of surface roughness and the application method.

Storage:
Store away from fire and heating devices.