Bitumen primer (primer) BITELAST EKOBIT DSTU B V.2.7-108-2001, Dnipropetrovsk region.

Bitumen primer (primer) BITELST Ecobit DSTU B V.2.7-108-2001 (GOST 30693-2000) Intended for preparation (priming) of high-quality gluing of various waterproofing materials to porous, rough and dusty surfaces

Purpose:
— applying a primer layer before applying "Bitelast" mastic

Properties:
— is a thick mass, ready for use, which must be mixed if necessary;
— has good adhesion to horizontal and vertical surfaces;

Application:
The surface must be cleaned of weak damage, dirt and dust damage. The mastic is applied to a dry surface with a roller, brush, spatula, at an ambient temperature not lower than 0 °C.
Mastic consumption 0.2 kg/m2. The drying time of each 1 mm thick layer depends on the temperature of the environment and ranges from 1 to 24 hours.

Product description
The bituminous primer serves for the preparation (primer) of a rough or porous, rusted and sawdust surface for gluing various waterproofing materials. Does not require preheating. Can be used in all climatic zones in accordance with SniP 23-01.

Primer is a solution of bitumen in an organic solvent. You can buy ready-to-use construction material or concentrate from us.

Bituminous primer, which you can buy in our online store at a low price, is used during the following works:(//tractor-service.com)

repair and installation of a soft roof;

waterproofing of the floor, foundation, foundations made of concrete, etc.

It can be used as a temporary waterproofing of various building structures

Advantages of the material
The consistency and composition of the bituminous primer is designed to allow it to penetrate as deeply as possible into irregularities, surface cracks and pores, filling them and simultaneously binding dust particles, etc. The primer perfectly wets materials that differ in composition and density. It is suitable for preparing surfaces such as brick, metal, concrete and other mineral materials of natural origin.

The primer dries quickly enough and provides good, reliable adhesion of the floating waterproofing to the base. Thanks to it, the layer of waterproofing will last without repair for a long time.

Application method
Depending on the volume of work and the primed surface, the primer is applied with a roller, brushes, spatula or in bulk, followed by leveling with scrapers.

Bituminous primer (primer) has a consumption of 0.3 liters per 1 m2. The consumption depends on the thickness of the material application, the degree of surface roughness and the application method.

Storage:
Keep as far as possible from fire and heating devices.