All products
All found, ads: 246
Page: 4
← previous ... next → 
5
2472 UAH.
Pre-plow PNL 02.010 (H 074.20.000) assembled - used on PNL series plows. It is used for cutting the upper layer of the soil and planting plants...Price: UAH 2472.
3102 UAH.
BDT-7 sphere disc (smooth) - used on the BDT-7 disk harrow. It is used for cutting and partial turnover of the soil. It is attached to the shaft of the disc...Price: UAH 3102.
2
2289 UAH.
Plow shoe PLE 21.100 is used on plows of the PLN 3-35, 4-35, 5-35, PNB series. 3-35, PBL 3-35, 4-35 for fastening parts of working bodies. With the help of...Price: 2289 UAH.
3
459 UAH.
Plow holder made of cast steel ПНЧС 02.302 is used for attaching the front plow to the frame of the PLN plow 3-35, 4-35, 5-35. Fastened with a staple (1 pc.).
...Price: 459 UAH.
5
360 UAH.
KRN chisel - used on KRN-5,6 cultivator. Serves for loosening the soil between the rows. It is attached with the help of a bracket to the working section...
2
2246 UAH.
BDT-7 housing (7212) assembly - used on the disk section of the BDT-7 disk harrow (under bearing 7212). Serves for rotation of the shaft of the disc sec...
3
1635 UAH.
PNP strip 04.407 - used on plows of the PLN 3-35 series with a front plow. It is used to fasten the third front plow to the frame.
Technical characteristics...
4
165 UAH.
Cultivator leg KPS 5.3 (220 mm) (Odesa cut) - used on inter-row cultivator KRN, serves for cutting weeds and chopped...
2
327 hryvnias.
Glass PBL 3-35 02.405 - serves for fastening the rack of the plow body. Used on plows PBL (PNB) 3-35, 4-35.
Weight - 2.2 kg.
We produce the whole...
4
324 hryvnias.
Krasnyanka BDVP bushing with one groove of a new model (round hole) - used in the bearing unit on the "Krasnyanka&q" disc harrow...
2
229 UAH.
Wheel bracket PLN 04.036.04 (PNU 00.636.06) - used on plows of the PLN 3-35, PBL 3-35 series with a corner release. It is used for fastening the wheel to the plow....
3
2444 hryvnias.
PLV 31.301A stand - used on PLN series plows.It is used for attaching working bodies to the frame.
The manufacturing method is casting.
Casting...
2
78 UAH.
KRN 3M clamp 16x65x100 (KRV 46.609.01) - used on KRN-5,6 cultivator. It is used to fasten the side bracket to the frame of the section of working...
12
87,000 UAH.
The KPS-4 pre-sowing tillage cultivator is intended for continuous pre-sowing tillage of the soil for grain and technical crops, dogl...
2
177 UAH.
PNU wheel clamp 00.636.09 - used on plows of the PLN 3-35 series with a front plow. Used to fasten the wheel to the plow. Made of a circle d...
2
240 hryvnias.
BDVP nut M38 square 60x60 right - used on the "Krasnyanka" harrow and serves to fix the discs on the shaft. It is installed on the end of the shaft....
3
480 UAH.
Krasnyanka BDVP harrow housing cover - used in the bearing assembly on the BDVP disc harrow.
The method of manufacture is casting by fired m...
3
327 UAH.
BDVP hub dust collector (metal) is installed in the hub and serves as protection for bearings from dust, dirt (environment). On the very ...
6
57,000 UAH.
Hinged furrow plow PNB 3-35 is intended for plowing soils for grain and industrial crops to a depth of up to 30 cm.
The plow is used in all fields...
2
196 UAH.
The KRN stand is attached to the razor leg and installed on the sides of the section of the inter-row cultivator KRN. It is made from a strip measuring 14mm x 45mm, st...