BDF harrow - mounted disc harrow 2.1, 2.4 meters of grip ORIGINAL, Poltava region.

Harrow BDF - mounteddisk harrow 2.1, 2.4 meters of gripDisk harrow with frontal arrangement of working bodies ... The harrow is produced as a mounted BDF (working width from 1.8 to 3.1 meters), and trailed versions of BDF
This disk harrow is intended for continuous and pre-sowing soil processing of different mechanical composition for technical, grain and fodder crops and with grinding and embedding of plant residues in the soil (refreshing of sodden meadows) in various agrotechnical schemes. The adjustable processing depth is approximately 8 to 18 cm.
Disk working body, which is a cut-out spherical disk (chamois) installed on the hub, with a diameter of 650 mm. and 6 mm thick, with internal sharpening along the entire contour. Thanks to the special geometry of the tubular rack, it is installed at an optimal angle of attack to the line of traction and an angle to the vertical, which ensures high-quality crushing, crushing and turnover of the cut layer.(//tractor-service.com)
The harrow can be used in all soil and climatic zones where the soil moisture does not exceed 27 percent and the soil hardness does not exceed 3.5 MPa, and it is also not recommended to use this harrow in areas with significant stony inclusions. Due to the use of individual racks in the design, the front harrow can be used at high working speeds - up to 14 km/h.
Unlike similar harrows of other manufacturers, the design of this harrow uses camomile discs (cut-out spherical) with a diameter of 650 mm, a thickness of 6 mm, made of 65G steel. During production, the disks are thermally treated, which ensures hardness. The metal anther, which is installed on the axis during assembly, covers the hub, forming a protective structure, which is supplemented by a sleeve with an oil seal inside and an anther outside. The unit is very well sealed from the outside environment due to this design.
We deliver to all regions of Ukraine.