Mastic bitumen-latex for waterproofing MG-3 Ecobit DSTU B V.2.7-108-2001 20 kg, Dnipropetrovsk region.

Bitumen-latex mastic for waterproofing MG-3 Ecobit DSTU B V.2.7-108-2001
For the installation of new mastic and repair of all types of roofs, as well as for the protection of metal structures from aggressive influences. For coating waterproofing of floor coverings, underground parts of foundations, retaining walls, as well as for sealing the joints of cast iron and reinforced concrete sewer pipes. For waterproofing walls and floors in basements, bathrooms and toilets.

Bitumen-latex mastic for waterproofing MG-3 Ecobit DSTU B V.2.7-108-2001

For the installation of new mastic and repair of all types of roofs, as well as for the protection of metal structures from aggressive influences. For coating waterproofing of floor coverings, underground parts of foundations, retaining walls, as well as for sealing the joints of cast iron and reinforced concrete sewer pipes. For waterproofing walls and floors in basements, bathrooms and toilets.

For the installation of new mastic and repair of all types of roofs, as well as for the protection of metal structures from aggressive influences. For coating waterproofing of floor coverings, underground parts of foundations, retaining walls, as well as for sealing the joints of cast iron and reinforced concrete sewer pipes. For waterproofing walls and floors in basements, bathrooms and toilets.

Solves slush tasks

Main consumer properties:

• supplied ready-made
• waterproof and steamproof
• has high adhesion to various materials.
• allows storage and use at temperatures down to minus 15 °C
• elastic
• in a reinforced layer of mastic, completely dry, you can plaster, putty, glue ceramic tiles, lay a screed
• on an organic solvent(//tractor-service.com)
• elastic
• in a reinforced layer of mastic, completely dry, you can plaster, putty, glue ceramic tiles, lay a screed
• on an organic solvent

Appearance and composition:

Black paste of thixotropic consistency — bitumen-rubber solution in white spirit with fillers, strengthens.

Technical characteristics at t° = 20 °C and relative air humidity 60%

Estimated consumption for thicknesses of 1 mm, kg/m2 1
Adhesion strength to the base (adhesion to metal, concrete, brick), MPa, not less than 0.2
Post strength, MPa 0.2
Compared elongation at break,%, not less than 100
Water permeability, atm, not less than 6
Water absorption,%, no more than 2
Dry residue,%, not less than 75
Heat resistance, °C, not less than 70
Resistance to cracks in the case of bending on bars with a rounded radius of 5.0 ± 0.2 mm, °C, not taken into account
minus 15
* For a layer of mastic 1 mm thick after drying for 7 days.