Tegeron Soil ECOBIT - adhesive composition bucket 20 l/ 17 kg, Dnipropetrovsk region.

Tegeron soil Ecobit — adhesive composition DSTU B V.2.7-106-2001 Necessary for preparing the foundations before laying self-adhesive waterproofing and roofing materials. Provides strong adhesion of waterproofing materials to rough and dusty surfaces.

Tegeron soil Ecobit — adhesive composition DSTU B V.2.7-106-2001

Installation of a new roof, repair of an old one (together with roofing felt-bituminous coating or in combination with it), coating waterproofing of foundations, walls, for sealing closed vertical and horizontal joints of external walls, etc., sealing of joints of rolled insulating materials, waterproofing of various surfaces (reinforced concrete, metal, wooden, etc.), sealing of closed vertical and horizontal joints of external walls, waterproofing Floor (showers, bathrooms, toilets).

It is a waterproofing sealing mastic made on the basis of petroleum bitumen, butyl rubber, high-quality solvents and other technologicaladditives. Necessary for preparing the foundations before laying self-adhesive waterproofing and roofing materials. Provides strong adhesion of waterproofing materials to rough and dusty surfaces.

Appointment

To use "Tegeron-soil" mastic, the surface must be cleaned of weak, destroyed, destroyed elements, covering of dirt and dust (garbage). The mastic is applied to a dry surface with a roller, brush or spatula, at an ambient temperature not lower than 0 °C. Mastic is intended only for external works.

Mastic serves to prepare concrete and metal surfaces to improve their adhesive properties before laying floating roofing materials on them. The mastic is completely ready for use. The drying time of each 1 mm thick layer depends on the temperature of the environment and ranges from 1 to 24 hours.

Properties

- is a thick mass ready for use, which at

needs must be mixed;
(//tractor-service.com)
- easily succumbs to the pressure of the tool used;

- has good adhesion to horizontal and vertical surfaces

Application

The surface must be cleaned of loose cracks, cracks, dirt and dust. Mastic is applied to a dry surface with a roller, brush, spatula, in a layer of at least 1 mm at an ambient temperature of at least 50 C.

During roofing waterproofing works, the surface must be cleaned of weakly stable, collapsible coating elements, dirt, dust, grease and other contaminants. Mastic is applied to the surface with a brush, spatula, roller in a layer of at least 1 mm at an ambient temperature of at least 50 C.

Consumption of mastic is 0.8 — 1.2 kg/m2. The drying time of each 1 mm thick layer depends on the temperature of the environment and ranges from 1 to 24 hours. If the thickness of the layer increases, the drying time may increase.

To increase the stickiness of the mastic and ease of work, in the cold season, it is recommended to pre-heat the mastic in a metalcontainer on a closed fire to 500C.

Storage

Keep as far as possible from fire and heating devices.

Packaging

Mastic is packaged in containers with a capacity of 10 kg to 45 kg.