Cleaner mounting foam Nosorig 500 ml, Kyiv

Mounting foam cleaner
Professional multifunctional tool for removing unhardened stains and residues of polyurethane foams and glues, cleaning applicator guns, effective cleaning and degreasing of surfaces. 

Application method
The working position of the balloon is upside down. It is better to blow the gun from solvent residues in the upside-down position.

Temperature mode of use: +5 ̊С to +30 ̊С.

Cleaning the applicator gun

Remove the mounting foam cylinder from the gun. Pull the trigger of the mounting gun to release the remaining foam. Connect the supplied spray nozzle to the valve of the cleaner cylinder and clean the foam from the gun seat. Remove the nozzle and screw the gun onto the cleaner bottle. Press the trigger and leave the cleaner inside the gun for 2-3 minutes. Press the hook again to rinse the gun from the remaining foam. If necessary, repeat these actions several times.(//tractor-service.com)

Removing foam stains

Shake the balloon for 5 seconds. Attach the atomizer nozzle to the valve of the cylinder. Apply the cleaner to fresh foam stains. Wipe the treatment areas dry with a cotton cloth to finally remove contamination.

Safety measures
If it gets on the skin and mucous membranes, the cleaner has an irritating effect. Use in well-ventilated areas. Keep out of the reach of children. Do not use near sources of flame, hot surfaces and working electrical equipment. When working, use personal protective equipment: gloves,
protective clothing, respirator, glasses. In case of contact with the skin or mucous membranes, the cleaner should be washed off immediately with a large amount of clean running water, if necessary seek medical help. Explosive and fire hazard. Do not puncture/damage the cylinder even after use.

Storage
Store in the manufacturer's original packaging with the valve up in the temperature range +5...+30°C at a distance of at least 1.5 m from heating devices and sources of open flame, protected from moisture and direct sunlight. Do not heat above +50°C. The warranty period of storage is 18 months from the date of production.