Grain dryer Agro Star 700-1000 t/day, Kirovohrad region.

Highly productive grain dryers for large farms and elevators!
Principle of operation ofcereals "Agro Star" dryers.
Wet grain is fed by auxiliary equipment (e.g. noria, conveyor) into the upper part of the dryer, where it is evenly distributed along its entire length with the help of an auger. After filling with grain, the auger is automatically turned off and on at the command of the filling sensor. Air heated by gas burners under the pressure of fans passes through a uniform layer of grain, heats it and removes moisture to the outside through the perforated walls of the sections. To cool the grain to the storage temperature, a fan of the lower chamber of the dryer is used.The productivity of the grain dryer depends on the initial grain moisture and the selected drying mode and is regulated by the speed of rotation of the dosing rollers, which are located at the bottom of the grain sections along the entire length of the dryer on both sides. After the rollers, the dried grain enters the lower auger of the dryer and is further transported by auxiliary equipment for cleaning or storage.

The main design advantages of "Agro Star" grain dryers: 150
Зернові інвертори між модулями створюють перехресний рух зерна при його проходженні з верхнього модуля до нижнього та забезпечують високу рівномірність сушіння.
Five separated temperature zones allow you to gradually heat the grain that passes through the dryer during drying, thereby avoiding overheating of the grain and reducing its cracking.
The special form of perforation of stainless steel grates allows drying of any crop (includingrapeseed) without changing the grates and losing the productivity of the grain dryer.
The improved air supply system to the chambers increases the dryer's productivity by up to 25% compared to its counterparts.
The body of the grain dryer is made of imported galvanized steel with a coating of 275 g/m2, and the bolted connections are made of hardware of strength class 8.8. significantly increases its service life.
The use of low-flame octagonal burners in combination with automatic maintenance of the set temperature ensure economical and efficient burning of liquefied gas (propane-butane).
The reliable and safe operation of the gas main is ensured by the use of high-quality electromagnetic valves and valves of Italian and Swiss production.
The use of axial fans manufactured by "Multi-Wing" (Denmark) reduces the load on electric motors and ensures stable air supply to the chambers.(//tractor-service.com)
The durability of the screws with significant drying volumes is achieved due to the use of turns made of abrasion-resistant steel.
Thanks to the complex steel construction of the dosing rollers, their deformation is impossible when unwanted foreign objects fall on them.
The use of European pulleys and bearings ensures trouble-free operation of the drive units of the dryer.
The presence of a large number of handrails, railings and ladders allows you to conveniently and safely perform inspection and maintenance of all parts of the dryer.
Electronic components from Schneider Electric and Siemens (Germany) are responsible for the trouble-free operation of the electrical part of the grain dryer, and the high-tech control and safety system based on the Schneider Electric industrial controller minimizes the human factor in the operation of the equipment.
The modern touch panel of the control panel allows you to remotely enter and monitor operating parameters such as: air temperature in the dryer chamber, grain temperature, burner operation parameters, operation of loading and unloading systems, security system messages.

The cost of the equipment depends on its performance, so get details from the phone number indicated in the ad.

The guarantee for grain dryers is 24 months.
Technical support 24/7.
Delivery and installation are included in the price.
The equipment is subject to partial compensation.