Fendt 936 Vario Power wheeled tractor for sale AGCO/Fendt GmbH - Germany, Kherson region.

Demonstratsionny. Narabotka 30 m.h. G.v.- 2010.
Model Fendt 936 Vario Power
Deutz motor
Rated power (kW / hp) (EG 97/68) 243 / 330
Maximum power (kW / hp) (EG 97/68) 265 / 360
Rated power (kW / hp) (ECE R24) 261 / 356
Maximum power (kW / hp) (ECE R24) 269 / 366
Maximum torque, Nm / rpm 1498 / 1450
Torque reserve 34%
Cylinder diameter/cylinder stroke/engine displacement 110mm/ 136mm/ 7755cm³
Specific fuel consumption, g/kW*h 195
Gear box and power take-off shafts
Gearbox type Stepless/Vario
Maximum speed, km / h. 50
Rear GDP, rev / min. 540E / 1000
Tractor hydraulic system
Productivity of the hydraulic pump, l/min / Pressure, bar 160 l/min. at 200 bar
The hydraulic bath is separated from the gearbox bath Serial.
Load capacity of the rear hitch, kg. 11,800
The maximum amount of hydraulic oil that can be removed, l 87
Overall dimensions and weight
Length / Width / Height, mm 5655 / 2750 / 3372(//tractor-service.com)
Weight, kg (according to DIN 70020) 10,830
Wheels front 600/70R34
Rear wheels 710/75R42 (Ø=2150mm)
TRAFFIC SPEED – 50 KM/H. AUTOMATIC COUPLING (LOCKING FROM THE CABIN)
Additional seat for the operator's assistant Pendulum towing device
Climate control Rear hinge cat 4
The front axle is shock-absorbed 4 hydraulic pairs behind.
Pneumatic brake system Back drain without resistance for hydraulic actuators
Additional weight, front - 2500 kg. Additional working lights: A-pillar, rear fenders
Additional weight on the rear wheels - 2 x 1000 kg Stroboscope
Tail of the rear GDP 1 ¾ ´´ 6 - splines Rear hinge of one-way action
1. Stepless "Vario" drive from FENDT provides the highest efficiency in the range from 8 to 16 km/h.
2. The lowest specific fuel consumption, 195 g/kWh.
3. The hydraulic bath is designed separately from the gearbox bath. There is no mixing of hydraulic oil with gearbox oil, which makes it possible to quickly change the unit from the tractor with another hydraulic oil. The checkpoint always remains sterile.
4. Damping of the front bridge (amplitude up to 30 cm). The possibility of working with high-speed units, ensuring not only the comfort of the operator, but also increasing the productivity of the tractor.
5. Automatic and forced (for extremely difficult working conditions) locking of the front axle differential.
6. High volumecapacitive rubber 710 mm wide and 215 cm high. The working pressure is 1.0-1.2 bar, which ensures low pressure on the ground, and an increase in traction force due to the large area of the wheel's contact point with the ground, with the tractor's overall width not being large.
7. 20 lighting headlights, 16 front and 4 rear lights, provide the ability to work 24 hours a day.
8. The rear attachment (CAT 4) with automatic hooks allows you to work with any European and American unit.
9. Pneumatic compressor and pneumatic brake system (one- and two-circuit conductor) in the basic configuration. Possibility of universal use, and constant availability of air for pressure regulation inwheels and maintenance.

The cost of the equipment includes: delivery on terms (Seller's warehouse) training of the customer's personnel to work with the equipment, provision of all necessary technical documentation.