Fully reinforced bituminous rubber insulation MBR-5 Ecobit GOST 30693-2000 20 kg, Dnepropetrovsk region.

Mastika MBR - 5 Ecobit Mastika bitumno rezinova Roofing is a waterproofing material that is popular when performing construction and installation work on roof coverings.
Description
Highly reinforced bitumen rubber insulation MBR-5 Ecobit is a system of external anti-corrosion protection of the metal surface of pipelines with the aim of increasing their service life.

Spectrum of application
VUS bituminous - rubber insulation is used for:

arrangement of gas pipelines with carrier pressure up to 1.2 MPa and pipelines passing through the territory of industrial zones and settlements;
construction of highway and industrial gas and oil pipelines;
increasing the durability of pipes;
creating a barrier limiter against destructive stray currents;
protection of pipelines from corrosion and mechanical damage;
underground installation in areas with complex operating conditions;
creation or reconstruction of gas pipelines, oil pipelines, as well as water and heat networks;
laying of main pipelines, both underground and underwater.
Advantages of the material
The advantages of using VUS isolation include:
(//tractor-service.com)
low moisture permeability and water absorption;
resistance to mechanical impact and vibrations;
high adhesion to the steel surface;
resistance to cathodic exfoliation;
high anti-corrosion properties;
environmental friendliness and safety for a person;
good level of heat resistance;
resistance to aggressive acid and alkaline environments;
wide temperature range of operation;
long service life.
Rules for working with VUS isolation
To get a high-quality coating, you need to follow a certain algorithm of actions:

it is necessary to clean the pipe from deposits and rust;
apply an adhesive sublayer, 2 to 3.5 mm thick, to the outer surface of the pipeline.
apply an outer protective layer based on a thermally light-stabilized polyethylene composition;
clean the ends of the pipeline.
The lateral extrusion method is used to perform such insulation. With its help, it is possible to achieve a protective coating thickness of up to 5 mm.