Mastic liquid bituminous for waterproofing HYDROIZOL -2 Ecobit 20 kg, Dnipropetrovsk region.

Mastic HYDROISOL Ecobit-2 bitumen-polymer GOST 30693-2000 The mastic is intended for the installation of new and repair of existing roofs and waterproofing in buildings of various purposes in all climatic conditions, as well as for anti-corrosion protection of metal structures, technological equipment and cars.
ECOBIT-2 HYDROISOL MASTIC ( Bitumen-polymer hydroisolation )

Description
Mastic bituminous insulating HYDROISOL Ecobit - 2

Purpose: Bituminous mastic HYDROISOL Ecobit - 2 is an inexpensive coating material intended for anti-corrosion protection of structures made of wood, concrete and metal. Using this product, the consumer can be absolutely confident in the quality of the created waterproofing. Thanks to excellent anti-corrosion properties, it significantly increases the service life of surfaces.

Description of mastic HYDROISOL Ecobit-2 GOST 30693-2000 (DSTU B.V.2.7-108-2001).pdf
Passport of mastic HYDROISOL Ecobit-2 GOST 30693-2000 (DSTU B.V.2.7-108-2001).pdf

Classification by purpose:
Sealing machines
Hydroisolations
Description:
This material belongs to the category of universal with a wide range of applications. It is produced in the form of a homogeneous pasty mixture that has a semi-liquid consistency and consists of petroleum bitumen, oil solvents and components - fillers.(//tractor-service.com)

Thanks to petroleum bitumen obtained during oil refining, mba mastic can boast excellent plasticity, viscosity and elasticity. Oil solvents contribute to easy application to the base and excellent absorbency in the structure, which significantly increases the operational reliability of the material. In addition, among the indisputable advantages of this product:

Frost - and heat resistance. The material is resistant to both low and high temperatures. Even in abnormal heat or cold, the waterproofing coating does not lose its shape and retains its elastic qualities;

Durability The results of numerous tests confirm that the average service life of waterproofing made of bitumen mastic is no less than 25-30 years;

Ease of installation. To apply a layer of coating on the base, it is enough to use an ordinary brush, roller or spatula. The material itself is simply mixed with a perforator or drill before laying.

Scope:
Insulating bituminous mastic is used for the following works:
external waterproofing of foundations, basements and other underground structures;
isolation of pipeline communications located above and below the ground;
external anti-corrosion treatment of structures made of reinforced concrete and metal;
external waterproofing of septic tank rings, sewer wells, reinforced concrete structures installed in wet soils;
waterproofing between the plinth and wall panels;
roofing works (coating of joints and seams).