New TRACTOR NEW HOLLAND T8.435 GENESIS STAGE V - top equipment, Zhytomyr region.

Technical characteristics of T8.435 PLMI UC STAGE V
FPT Cursor Engine 9
Working volume (cm³) 8700
Number of cylinders / air supply / number of valves / environmental standard 6 / eVGT / 4/ Stage V
Nominal power - ISO 14396/EC R120 (kW/hp) 305/415
Maximum power - ISO 14396/EC R120 (kW/hp)/with system EPM 320/435
Nominal engine speed (rpm) 2000
Maximum torque - ISO TR14396 (Nm) 1300 at 1850 rpm
AdBlue tank capacity (liters) 99
Coefficient of torque reserve (%) 39 / 27
Fuel tank capacity (l) 609
Frequency of maintenance (motor/hour) 600
Transmission
21x5 Powershift Eco 50 km/h.
Min. speed / Max. speed at 1725 rpm (km/h) 0.03 / 50(//tractor-service.com)
Bridges
Front axle 4WD with active damping Class 5
The Terralock™ function (Auto Diff / Auto 4WD) can disable the differential lock, and then the four-wheel drive, which allows you to turn in a minimal area with minimal damage to the soil.
The rear bridge is a beam-type reinforced structure (with 98" semi-axles with a diameter of 127 mm.)
Turning radius 4970 mm
Work productivity (actual throughput of each hydrocouple) from bases. pump/MegaFlow pump™ on Auto Command™ models (l/min) 271
5 pairs of hydraulic outlets (3 configured and 2 not configured)
Electronic control of traction force for hydraulically adjustable center rods and right-hand diagonal (EDC)
Hinged system
The rear attachment of the CAT. 4N/3 with mechanical adjustment of the central screw, lower rods with hooks for quick coupling. The diameter of the hydraulic cylinders is 115 mm.
Max. load capacity on layer tips - hydraulic cylinders 115 mm (kg) 10927
Max. load capacity (610 mm by layer tips) - hydraulic cylinders 115 mm (kg) 9888
Category of the front hinged system II
Load capacity of the front hinged system (610 mm in front of ball tips) (kg) 5810
Automatic smooth start of GDP, controlled by position sensor
3 with three interchangeable shanks