Wood chipper RM160TK (mounted on tractor with side loading), Lviv region.

The main purpose of wood chipping machines is the grinding of non-condensable woodworking waste and
logging type: horbil, rail, log, branches and tops of trees, as well as proven themselves well at
cleaning of forest plantations, sanitary zones of large cities, clearing of power lines, cleaning of roadsides in
technological and fuel chips (chips). Chips obtained as a result of processing are used at
chipboard production; for the production of arbolite; for the production of briquettes and pellets; for decorating the park
zones; for floor insulation in farms; for making compost, as well as as
of biological fuel for heat stations, boiler plants, gas generators.
The main working bodycrushers is a massivesteel disk with a diameter of 810mm, on which are installed
two chopping knives, and one counterknife is installed in the machine body. Raw material is fed to the bunker by a worker(//tractor-service.com)
manually and with the help of a hydraulic feed system is pulled into the working area.
Among the technical advantages of felling machines, the following should be noted:
 Supply of raw materials is carried out at 90° from the axis of placementtractor-slasher-trailer. This significantly simplifies
work, when loading raw materials into a wood chipper.
 High productivity - up to 10.0 cubic meters/hour (6 tons/hour), depending on the type of grinding material;
 Large volumes of wood shredding waste up to 160 mm in diameter, up to 240 mm wide, any
length;
 Availability of a mechanism for supplying raw materials to the working area of the machine;
 The possibility of hydraulically adjusting the size of the chip fraction at the exit from 10 to 30 mm;
 Adjusting the direction and height of the chip ejection from the chip pipe.