Brake tape overlay on the pads of the parking brake Feredo, Dnepropetrovsk region.

Brake tapes are products made of asbestos and other components resistant to high temperatures (above +200°C), used in brake and friction nodes of machines and mechanisms, with dry friction, where high heat resistance and wear resistance are required.

Brake tape EM-1 (Elastic material) GOST 15960-79

Unpolished, rolled, black brake tape.
It is used in brake friction units of machines and mechanisms with dry friction with a friction surface temperature of up to +200°С, working at a pressure of up to 1.5-2.5 MPa.

Rolled material is characterized by increased elasticity, the possibility of use in braking devices with different radius of curvature of the friction surface.

A tape with a width of 50 - 200 mm, a thickness of 5 - 10 mm is supplied.

EM-1 brake tape retains its operational properties in areas with a moderate, tropical and cold climate, at temperatures up to -60°C.

Woven brake tape LAT-2 GOST 1198-93
(//tractor-service.com)
Asbestos, woven, brake tape, reinforced with brass wire, impregnated with an oil composition.

It is used for work in dry-type friction nodes at a pressure of up to 5 MPa and a friction surface temperature of up to +300°C.

A tape with a width of 50 - 200 mm, a thickness of 5 - 14 mm is supplied.

Brake tape EM-K GOST 15960-79

Unpolished, red brake tape with brass shavings.

It is used in brake and friction units of machines and mechanisms during dry friction of material with a friction surface temperature of up to +200°С, working at a pressure of up to 1.5-2.5 MPa.

EM-K brake tape is characterized by increased elasticity and the possibility of use in braking devices with different radius of curvature of the friction surface.

The tape is supplied with a width of 50 - 200 mm, a thickness of 5 - 10 mm, (depending on the thickness).