Cardan shaft (cardan) for agricultural equipment, Kyiv region.

I offer a cardan shaft of Ukrainian production:
Cardan shaft forharvesters, sprayers, seeders, mowers, feed dispensers, spreaders of mineral fertilizers and other agricultural machinery
Here are the necessary parameters of the product:
1. The length of the shaft in the folded state, mm
2. Diameter of the cup of the cross, mm
3. Torque
4. The number of splines on both sides of the shaft
1. Disk AG 2.1.01 (width 660 mm)
2. Disk AG 2.1.01-01 (W 510 mm)
3. Disc assembly AG 2.1.00 for AG-2,4
4. Disc assembly AG 7.1.00 for AG-2,4-20
5. Pressing disk AG 2.1.03
6. AG cap 2.0.01
7. Bearing housing AG 3.0.02
8. Weight of AG 0.6.00 for AG-2,4-20
9. Weight of AG 4.0.00 for AG-2,4-15
10. Here is AG-2.1.02 for AG-2,4-15
11. Here is AG 2.1.02-01 AG-2,4-20
12. Frame AG 1.0.00-03 for AG-2,4-15(//tractor-service.com)
13. Frame AG 6.0.00 for AG-2,4-20
14.Roller frame AG 8.2.00-3 for AG-2,4-20
15. Roller frame AG 27.2.00 for AG-2,4-20 (under subsh. 31-UCF 208)
16. Assembly rack (front) AG 2.0.00 for AG-2,4-15
17. Assembly rack (rear) AG 2.0.00-01 for AG-2,4-15
18. Assembly rack (front) AG 7.0.00 for AG-2,4-20
19. Assembly rack (rear) AG 7.0.00-01 for AG-2,4-20
20. Traction AG 0.2.00
21. Thrust AG 0.2.00 complete with screw (right AG 0.0.22 / left AG 0.0.22-01)
22. Fixator AG 0.1.00
23. Chistyk AG 2.0.04
24. Screw (right) AG 0.0.22
25. Screw (left) AG 0.0.22-01
26. Sleeve AG 2.0.02
27. Nut AG 2.0.05 (MVV 30x2)
28. Pressing disk AG 2.1.43
29. Rack assembly AG 2.0.00 V
30. Rack assembly AG 2.0.00 V-1
31. Rack assembly AG 7.0.00 V
32. Rack assembly AG 7.0.00 V-1