Injector spray IDKT from Lechler (Germany), Kyiv region.

Spray injector IDKT of Lechler company (Germany)

Torch opening angle: 2 x 120°
Material: POM, ceramics
Characteristics :
- Injector properties
- The range of workers pressed:
IDKT-03 from 1.5 to 6.0 atm
IDKT-04/-05 from 1.0 to 6.0 atm
- One torch at an angle of 30° in the direction of movement, the second 30° in the opposite direction
- Spectrum of drops from large to medium.
- Special anti-erosion properties in the pressure range up to 3.0 atm.
- Very compact dimensions (length: 22 mm)(//tractor-service.com)
- Suitable for systems with bayonet heads with an 8 mm hole.
- They meet the requirements of the FSB of Germany
Fields of application
- Introduction of contact preparations, for exampleinsecticides on rapeseed
- Processing of corn, vegetable crops, potatoes
-Application of herbicides and fungicides
Advantages of IDKT sprayers

- Significant advantages in reducing drift compared to standard slot sprayers
- Due to the bifurcation of the torch, a larger number of drops is formed than in the "ordinary" IDK sprayer, which contributes to the improvement of the coating density.
- Exceptional characteristics of covering vertical surfaces (cob, stalk)
- The mouthpiece is optimally protected from mechanical damage due to the extended side sides of the atomizer body.
- The most compact two-torch injector sprayer on the market. Suitable for all bars. Does not come into contact with the rod and other partssprayer when rotating the multi-position cutting device