Universal forest milling cutter-rotator SEPPI MULTIFORST, Kirovohrad region.

The uniqueness of the Seppi Multiforst milling cutter-mulcher lies in the fact that with one mechanism it is possible to cut down trees, small forests and shrubs, with simultaneous grinding of them into chips, and to mill the soil to a depth of up to 25 cm (and more - depending on the type of soil) with simultaneous destruction of stumps, stones, roots. This type of site clearing is the most effective and ecological. With the help of a universal mulcher-cutter, it is also possible to restore dirt roads, root up old gardens, clear areas after felling the forest for subsequent exploitation. They are clearing passages under power lines and gas and oil pipelines. Clearing overgrown fields in this way allows sowing immediately.
Features:
• Fells and cuts trees and shrubs up to 250 mm in diameter;
• Maximum working depth – 250 mm (and more depending on the type of soil);
• Breaks stones - 150 mm in diameter;
• Working speed from 0.5 to 3 km/hour.
BASIC SET:
• 3-point hinged system of the 2nd category;
• gearbox for operation at 540 rpm (in the ground) and 1000 rpm (on the surface);
• two-way belt drive of the rotor;
• hydraulic hood opening/closing;(//tractor-service.com)
• body elements made of wear-resistant steel;
• support "skis" for height adjustment;
• rolling, compacting shaft, with hydraulic lift for felling trees;
• the internal compartment is protected by special Hardox steel plates;
• drive cardan shaft with protective clutch for torque limitation;
• fixed cutters of 3 types with carbide tips.
OPTIONS:
• narrow "skis" for deep work;
• designations for traffic on public roads.

Link: http://agroremmash-plus.com/index.php/2016-08-29-11-31-43/lesnye-frezy-seppi/universalnaya-lesnaya-freza-seppi-multiforst