Mounted soil tiller / Mounted soil tiller FGN 1.4/1.6/2.1m, Vinnytsia region.

Hinged soil tiller FGN
The mounted tiller is used for thorough soil preparation for vegetable and grain crops. The tiller is used both when processing heavy, flooded soils, and after harvesting coarse-stemmed crops and the radical improvement of fodder lands. The working organs of the cutter are plate knives fixed on rotating shafts.
The tiller creates optimal soil density thanks to a high degree of crushing, increases its biological and biochemical activity, which contributes to the increase in the yield of various crops. Aggregates of this type are used for the development of fallow lands covered with dense vegetation, for processing a layer of perennial grasses, fields after harvesting corn, high-stem crops or fallen breads, as well as for laying high-stem siderates. In these difficult conditions, the use of a tractor tiller guarantees the crushing of plant residues and their intensive mixing with the soil at a shallow processing depth of 5 to 18 cm.
Adjustmentswheels in the center allow it to be used for stubble cultivation, and also protect the cutter from excessive deepening.
It is recommended to choose a cutter slightly smaller than recommended forspecific tractor. The milling cutter gives a more effective result when increasing the speed of movement while working in the field.
So, using a tiller, you will be able to turn over, cultivate the land, and form flower beds. Milling, mixing, crumbling, leveling the soil, as well as placing organic fertilizers in the soil in one pass. The use of tillers helps to get rid of weeds and pests.

Technical data and equipment
Model FGN-1,6 FGN-2,10(//tractor-service.com)
Working width m 1.60 2.10
Hinged type
Number of knives pcs 48 60
Processing depth mm up to 150
Productivity ha/h 0.6 0.8
Spin GDP rpm 540 rpm
Working speed km/h 8
Required power of the tractor hp. from 35 of 70
Dimensions m 1.40 x 1.60 x 1.50
Weight kg 300 350