Injection pump VD N999 - repair of concrete structures, Kharkiv region.

Opisania oborudovaniya:

The universal injection pump is used to stop and eliminate the further destruction of concrete structures, walls, floors, ceilings as a result of the formation of cracks and voids in them, as well as the elimination of active leaking water in any cement-containing and stone surfaces... high-quality waterproofing, stopping active leaks, removing dry and wet cracks, sealing working and deformation seams, filling voids
On the good side, this is a relatively new NICHE IN THE CONSTRUCTION BUSINESS, and your additional source of profit
The pump is powered by an electric drill, which is supplied in the kit. The drill regulates the revolutions and, accordingly, the pressure of the material from 0 to 400 bar. The chemical material is fed under high pressure into cracks or voids through packers that are pre-fixed in the repaired surface near the voids that need to be filled.

Complete set
- piston pump
- manometer;
- high pressure hose 4.5 m;
- loading funnel;(//tractor-service.com)
- electric drill;
- a set of tools and spare parts.

Technical characteristics:
- weight: 8 kg;
- maximum working pressure: 0 - 400 bar;
- productivity: up to 1 l/min;
- supply voltage: 220 V;
-capacity loading funnel: 2 l;
- nozzle for high-pressure injection: collet;
- power (electric drill pump drive): 560 W .