We compete with imports! The highest quality of Ukraine!
We manufacture
disks of old and new sample!
Variant 1: Cut-out harrow disc, outer diameter 625 mm, 5 square holes 13x13 mm for the hub, 8 teeth, thickness 6 mm, weight 13.5 kg,
Variant 2: Cut-out harrow disc, outer diameter 625 mm, 6 square holes 13x13 mm for the hub, 8 teeth, thickness 6 mm, weight 14 kg,
The production is based on the technologies of the State Standard of Ukraine! (former GOST)
Advantages:
- 65G spring steel or its analogs, with manganese or boron content, is used;
- Full heat treatment cycle. Hardening does not occur once (a shortened cycle), but in several stages (heating to high temperatures and soaking in oil or salt solution several times);
- The content of manganese (boron) in the metal only after the full cycle of heat treatment strengthens the product to such an extent that it becomes weakly wearable, i.e. wear-resistant to friction;
(//tractor-service.com)
- The optimal hardness of the product is 36-45 units (HRC);
- Volume hardening method is used (the product is fully heat-treated, not only along the working edge or surface);
The result of such a production process has been tested for decades. Therefore, fulfilling all the conditions, according to the technical documentation, and maintaining strict quality control for many years, we guarantee you the long-term operation of each product and significant savings when using our products.
Production and
warehouse of finished products in Zaporozhye.
The price is conditional because it depends on different factors.
Check by phone!
With regards to your work, LLC "NPP "TON"
Scientific and production enterprise
"Technology, Equipment, Setup"