Seeder Gaspardo MT-8 and MT-6 plowing Delivery, Dnipropetrovsk region.

Seeder MT General characteristics. The MT-type seeder allows you to get the best result with the least amount of money. The design of the seeder allows you to work on any type of field: traditional preparation with plowing, minimal processing, stubble (except dependent and virgin lands). The seeder allows you to sow at high speed, and the design of the coulters does not allow the seeds to jump out of the seed bed. The inter-row distance is regulated from 45 to 75 cm, which allows it to be used on various crops (sunflower, corn, beets). Sowing sections. Parallelogram mechanism with spring regulator. Wide support wheelswheels ensure accurate copying of the field surface and constant contact of the coulter with the surface, pressure on the soil of 70 kg/sq.cm and copying stroke of the coulter of 60 cm. Disc coulter. A distinctive feature of this seeder isthe presence of a disk coulter, identical to the one used on the "Kinze" seeder, which, in combination with wide rolling and pressing V-shapedwheels, ensures high-quality seed placement. The pneumatic seeding device of high quality assembly, with plastic seals, provides a stable vacuum and uniform supply of seeds. A special regulator-cutter eliminates duplicates and allows working with seeds of different calibration with the same stability and quality. The replaceable steel discs of the seeding device allow you to quickly and accurately reconfigure the seeder from one crop to another and provide a wide variety of crops to be sown. Special paddles-threshers on the disk produce constant mixing of the seedlings, which will ensure the normal operation of the device even when the seeds stick together. The transmission using sprockets with a special "slippery" plastic coating ensures low chain wear and reliable operation of the entire seeder. The seeding section is driven by a cardan shaft, which is much more protected from dust and dirt than a chain drive, which ensures a long service life and reliability of the unit. The shear bolt on the shaft will protect the sowing device from damage if a solid object hits it, and a special bell informs about the stop of the sowing device. The monitor monitors the sowing area and the operation of each seeding device. This allows you to avoid sifting and carry out high-quality sowing at any time of the day. List of additional equipment and characteristics Additional equipment - The seeder can come in versions with or without mechanisms for applying fertilizer. - The seeder can work on stubble with the use of a cutting disc, however, it is not recommended to use it on heavy virgin and dependent soils - Seeders can be equipped with monitors with optical sensors that allow the tractor driver to monitor the correct operation of the sections, excluding sieves. Characteristics MT-8 Productivity* 90-100 Working speed 10-12 km/h Working width 5.60 m Rows 8 pcs Max. row spacing 75 cm Seed hopper capacity 36 liters Tractor power 100 hp Weight 1280 kg. Capacity of bunkers for dry fertilizer** 370 liters