Reservoir 5000l double-walled METRIA for diesel fuel Capacity Barrel Tank Mini gas station turnkey, Volyn region.

RESERVOIR double-walled 5000l METRIA - UAH 135,000

The METRIA double-walled shockproof polyethylene tank is intended for storingdiesel fuel.

All tanks produced by METRIA are rotomolded (one part) and have no joints, seams or gluing.

Long-lasting: they do not change color, do not crack, do not corrode, are resistant to sunlight and ultraviolet rays.

WEIGHT: 350 KG
Width (diameter) 2300.0(mm)
Length 2950.0(mm)
Height 2340.0(mm)

Turnkey mini gas station 5000l based on a METRIA double-wall tank for diesel fuel with a filling module of the customer's choice, from UAH 20,000.

Tank 5000 l - UAH 135,000.
"Turnkey" with fuel module :
- UAH 135,000 + UAH 25,000 = UAH 160,000 (with MECHANICAL counter, error 2%)
- UAH 135,000 + UAH 37,000 = UAH 172,000 (with an ELECTRONIC accurate counter, error 0.5%)

5000l tank for diesel fuel with a module with GPS monitoring, issued by card - UAH 244,000.

Shipment - from the warehouse of the supplier "MINIAZS" LLC: Volyn region, Strumivka, st. Chikalenko, 24.

Fuel-dispensing column, designed for refueling machinery and transport with diesel fuel under the conditions of non-commercial accounting.

Manufacturer Metria (Poland)
Tank volume 5.0 (cubic m)
Tank material Plastic (seamless production)(//tractor-service.com)
Type of tank according to the number of walls Double-walled
Warranty period 120 (months)

An ideal solution for companies and individuals who own vehicles, trucks, agricultural and construction machinery, forklifts, tractors, etc., for the supply andPMM deliveries.

The tank does not require special care and cleaning.
Anti-corrosion agents are not used, water accumulation is insignificant.

The operation of the tank does not require special preparation, it consists in connecting the pump to a current source of 220,380,12,24 V, controlling the liquid level through the filling hatch, or using the indicator.

Optimum protection against fuel leakage and smell due to the use of a proven design solution - a double-walled structure, which also provides high resistance to mechanical damage.

High-quality polyethylene, from which the tanks are made, and the most modern production technologies provide reliable protection against temperature changes.

The tank is installed on the street, on a flat surface. Special conditions are defined by local legislation.
The tank must touch the soil surface tightly and stand vertically. The area cannot have edges, seams, protrusions.

Advantages of polyethylene tanks :

not afraid of shocks, collisions with transport, impact-resistant body;
not attached to the land and place;
no need for painting/retouching;
light weight: it can be easily moved from place to place, the capacity is easy to load and transport, it is easy to move with a forklift or crane,
it is not necessary to concrete the place for installation;
elastic, insensitive to average mechanical shocks (within reasonable limits);
water does not settle inside, which can get into the diesel fuel, which is characteristic of metal ones;
absence of rust that can get into the diesel engine when using metal containers with incomplete filling;
do not heat up in the sun like metal ones.

There are 1500l, 2500l, 5000l, 9000l tanks available.