Bituminous mastic for gluing roofing material PROMIZOL Ecobit -5 DSTU B V.2.7-108-2001, Dnipropetrovsk region.

Mastic PROMIZOL Ecobit-5 bituminous-polymer GOST 30693-2000 The mastic is intended for the construction of new and repair of existing roofs and waterproofing in buildings of various purposes in all climatic conditions, as well as for anti-corrosion protection of metal structures, technological equipment and auto.
MASTIC PROMIZOL ECOBIT-5 ( Bitumen-polymer composition for roofing )

Description
PROMIZOL Ecobit mastic - 5 is required both for creating a continuous coating and for performing local works — sealing of joints and abutments, filling technological gaps, sealing defective voids and cracks.

Description of mastic PROMIZOL Ecobit-5 GOST 30693-2000 (DSTU B.V.2.7-108-2001).pdf
Passport of mastic PROMIZOL Ecobit-5 GOST 30693-2000 (DSTU B.V.2.7-108-2001).pdf

Fields of application:
construction, reconstruction and repair of roofs with mastic and roll covering;
waterproofing of mines and tunnels, pools and fountains, basements and basement walls;
protection against corrosion, destruction and rotting of metal, concrete and wooden structures;(//tractor-service.com)
with special modifications, with road bitumen in the composition, it is possible to eliminate defects on car tires.
Since the material has high heat resistance and softening temperature, it is often used in regions with a moderate and hot climate.

Advantages of PROMIZOL Ecobit - 5:
After application and curing, the building material creates a durable and reliable coating that lasts a long time, does not stick to the base during use, does not swell, does not flake off, and does not crack. Thanks to the mastic, the service life of not only the isolated structure, but also the entire building or structure increases.

Features:
good adhesion to concrete, brick, reinforced concrete and roofing material, metal, wood, asbestos cement;
possibility of use on flat and pitched roofs, parapets and gutters;
absence of leaks due to the monolithic and seamless coating;
waterproofness, resistance to temperature changes and mechanical loads;
non-toxic, anti-bacterial;
economy: low cost and low consumption (0.8 - 1.2 kg/m2) with a long service life.
Mastic is applied to a thoroughly cleaned surface. Installation is carried out at an air temperature of - 20 to 40 °C. Application tool: brush (squeegee), spatula or squeegee.