Equipment for the production of prestressed concrete pipes, pillars, Kyiv

Equipment for the production of prestressed concrete pipes, columns, centrifugation and vibrocasting, BFS.

Technologies for centrifugation and vibrocasting:

- Reinforced concrete and prestressed pillars and piles

- Power transmission lines, electrification of railways

- Decorative lighting supports

- Telecommunication towers

- Precast and prestressed piles

Technology of centrifugation of prefabricated reinforced concrete pillars BFS.

A legacy of pipe innovation.

Decades of experience of BFS engineers and continuous improvement of BFS centrifugation technologies are also ideally applied in the production of these products. Taking advantage of the spin and pre-stressing process, posts and piles made on BFS equipment have maximum density, minimum weight and the best strength-to-weight ratio. This is guaranteed by more than 50 years of experience in this field and the production of modern centrifugation equipment.

Production technology of prefabricated and prestressed concrete pillars.

This technology is used for power line lighting systems, park lighting, decorative poles for street lighting.

Production of prefabricated and prestressed reinforced concrete columns by the method of vibropressing.

Columns, pillars and piles are made by vibropressing of any regular shape with an empty core or a full section.

The following shapes of conical posts are available: round, square, hexagonal, octagonal, fluted, bell-shaped and many other decorative shapes.
(//tractor-service.com)
Production technology of prefabricated reinforced concrete pillars.

Piles are used for soil reinforcement, building foundations, marine and land structures.

They have the following main characteristics:

The diameter of the lighting equipment is from 150 mm to 2000 mm and more.
Length from 6 to 50 meters.

Form for decorative pillars by vibropressing.

The use of biconical forms allows you to significantly increase productivity, since two or more products can be produced per cycle.

The degree of automation can be improved according to the customer's requirements in terms of productivity and flexibility to produce different sizes in one cycle.

Main characteristics:

Production range: outer diameter from 300 to 1200 mm.
Length from 6 to 50 m.
Biconical forms for two or more products in one form.
Forming process with PLC control.
Quick opening and closing of forms.
Quick concrete pouring system.
Forms of conical pillars: round, square, hexagonal, octagonal, fluted, bell-shaped, decorative, any regular geometric cross-section.
Prestressed or reinforced
Conical or cylindrical whole piles
Cylindrical hinged piles
Square/octagonal hinged piles
Micropiles, I-beam piles

Tell us about your needs - and we will design, install and commission your plant!