I will sell 8-frame lightweight beehives with a body on a Dadaniv frame and a shop on 145, Odesa region.

NEW 8-FRAMEBEHEEVES "INTELLIGENT" ON A DADAN FRAME WITH A PARTITION FOR 2 COMPARTMENTS AND A STORE UNDER THE 145 FRAME - COMPLETELY READY FOR USE
We offer beehives with the working name "Intelligent", which in the basic configuration consist of a nest housing with a bottom for a 300 frame and a magazine for a 145 frame (if necessary, it can be supplemented with additional magazines) and roofs with ventilation slits. All elements of the beehive are very light and have an aesthetic appearance: they are made of 22 mm (end walls) and 14 mm (side walls) board - they were made exclusively for themselves, but not all of them were in demand in the work from among the 500 pieces produced. The nest body is divided into 2 compartments by a plywood partition with 2 rafters (in the photo, the partition and rafters are removed for better visibility). The partition is easily dismantled/mounted and conveniently placed on top of the frames (as a kind of "canvas"). Beehives are painted in pleasant colors. Equipped with all 4 flight barriers, aluminum covering over wooden roof. Special grab handles on the side walls of the housing can be used both for removable handles and for grabbing the beehive directly by hand.(//tractor-service.com)
In semi-industrial/industrial apiaries, this hive can be used as a convenient and light "container" for flying around queens in layers on a standard frame and producing honeycombhoney.
This hive is especially attractive for beekeepers with small "amateur" apiaries, who can maintain them, including traveling using their own car with a trailer, independently without the involvement of outsiders - even at the age of "60+". At the same time, honey does not need to be pumped out in the field - it is delivered in convenient, affordable housings to the home (even to a city apartment), where it is pumped out calmly in a comfortable environment, or used as a honeycomb. For the winter, it is recommended to put under the walls a thick layer of 20 mm extruded PPU.