Grid-tablet for the combustion chamber of the autonomous air heater AT2000 S, D, Kyiv

The grid is intended for use in combustion chambers 65786A and 1322924A of Webasto Air Top 2000 self-contained heaters with a separate flame indicator, so the grid has two holes.
For the high-quality operation of the 65786A combustion chamber, the mesh must have a density that is neither too high nor too low, and the material must have the ability to withstand high temperatures and not be subject to rapid corrosion. Our nets meet these requirements. Beware of cheap fakes made from the wrong grades of steel!(//tractor-service.com)
We guarantee the repair and replacement of the grid, because the correct installation of the grid is of great importance, ESPECIALLY WHEN STARTING THE HEATER. If the mesh is not installed correctly,fuel may not reach the ignition zone and, as a result, cold nights!
We also recommend replacing the mesh on all Webasto Air Top heaters at least once every 2-3 years due to the possibility of clogging the mesh with low-quality fuel products that can be deposited in the form of tarry formations on the mesh.