Heat insulation, insulation, waterproofing with polyurethane foam sprayed with rigid PPU, Kyiv

Heat insulation, insulation, thermo- and waterproofing with sprayed rigid polyurethane foam (PPU) - a confident step towards your energy independence!

Rigid spray polyurethane foam, 2026: $249 - €349/m. cube. (40 kg) of PPU depending on the volume and raw material manufacturer. BASF-Germany, Poland, China. Warranty, experience, professional equipment. Internal and external thermal insulation, waterproofing, insulation. LLC "PPU PROFIT" 067 630-55-21, 050 356-81-58,[email protected]

Polyurethane foam. Internal and external insulation. From $249 to €349 per cubic meter. (40 kg) depending on the raw material manufacturer and volumes. LLC "PPU PROFIT"

We also work with your material (components of well-known manufacturers of closed-cell rigid polyurethane foam systems) at contractual fixed prices for processing and professional application per kg, set, ton.

The final cost is always formed individually, taking into account the specific conditions and scope of the work performed, the travel of workers, the delivery of materials and equipment to the object. Under the conditions of performing work on a complex surface and/or in cool weather on a surface with a temperature below +12C, the final cost is determined EXCLUSIVELY by the fact of the material used. At a positive surface temperature significantly less than +120C, in most cases it is possible to work, but the total cost due to an increase in the density of polyurethane foam in the finished form to + 50% or more will be much higher.
The work is carried out by personnel with extensive work experience (the current operators have more than 12 years in the most diverse areas of PPU application) in the spraying of PPU and polyurea, high-pressure dispensers for the processing of polyurethane foam (PPU) and polyurea PM and GPM (polyureas, polyureas), letters of recommendation.
Quality guarantee for works and materials: at least 5 years, for German BASF - at least 10 years. The term of operation of BASF is not less than 30 years. There is Ukrainian experience.
Certificates of Ukraine are attached to BASF materials, there are Technical Conditions.
Professional high-pressure equipment with a hydraulic drive (380 V, 25 kW), everything you need is available, a tour (forests on wheels), a diesel heat gun with a capacity of 30 kW, heating belts for raw materials in barrels, a professional pyrometer to detect possible condensation on the surface. Stable high quality, guarantee. Consultation, transparent, understandable calculations, responsible approach.
All links to the official website, social networks - all completed works (objects), photos and videos are exclusively ours.

* When we work with your material: We take your calculations as a basis or calculate the required amount of materials, we make, in accordance with the Technical Task, based on the minimum necessary data, such as: linear dimensions of the structure, photos of the surfaces, general appearance, floor and ceiling, your requirements for the temperature regime after spraying - the expected result of the thermal insulation of the PPU, etc. We coordinate the conditions of work / accommodation, staff food - yes/no, hours and days of possible work - for us, the opportunity to work around the clock on any day is a priority. There are sometimes restrictions on the objects for the night, in the morning and in the evening, on weekends, it is important to know this in advance. We agree on technical points and nuances, discuss surface preparation, if necessary, protection as needed for everything that may be affected by the fine fraction of PPU during spraying, agree on the start time of work and deadlines, the form and payment procedure. "Let's clap our hands." If the components have not yet been purchased and you do not have a clear understanding of the manufacturer, we discuss the options and you make an informed decision about what exactly we are working with. You pay directly to the dealer or supplier for the material with delivery to your facility. We start work at the agreed time.

The future is not what we dream about,(//tractor-service.com)
and what we create!

PPU - that is better from the future!
The best way to predict the future is to create it.

With respect and wishes for peace,
Ihor Zhmurko, director of LLC "PPU PROFIT"
Thermal and waterproofing monolithic polyurethane foam that is sprayed on

http://www.ppu-profit.com/index/0-2
[email protected]
+38 (067) 630-55-21 (Viber, WhatsApp, Telegram)

https://instagram.com/ppu_profit/
https://www.facebook.com/OOOPPUProfit/
https://www.youtube.com/user/MKPReal

Always glad to see you as our partners