2010
• 2268 mg - working time of the thresher
• AUTOCONTOUR – active copying of the surface in the longitudinal and transverse planes with a change in the cutting angle
• Harvester drive with variator, power 120 kW, variator operating range 284 - 425 rpm.
• Lifting cylinder
harvesters double action
• Inclined HP-type camera with adjustable cutting angle
• Dust extraction from an inclined chamber type HP
• Autopilot module
• Two-stage gearbox of the threshing drum with a range of 166-483 / 395-1150 rpm
• Stepless separation rotor drive 360-1050 rpm
• Electric adjustment of rotor plates
• 3-D cleaning for working on slopes with gradients up to 20%
• Chaff spreaders
• GRAINMETER –
a warehouse sensor weight in the grain elevator to determine the proportion of grain in the mass per threshing machine
• Electric grating adjustment from the cabin
(//tractor-service.com)
• Grain bunker with a volume of 12,800 l
• Unloading auger 3XL, reinforced. The distance from the center of the combine to the unloading point is 8479 mm. Unloading productivity up to 110 l \ s
• Straw shredder
• Track front drive
• Here is the back. Variable track system (2.87-3.47 m), load 11 t 28LR26 165A8 10 holes.
• CATERPILLAR C13 engine, rated power 465 hp.
• Quantimeter with constant humidity measurement
• Working lighting complete with xenon
• Cabin with climate control
• Preparation for radio, including antenna and speakers
• CD player with radio
• Additional lighting, xenon
• Refrigerator for drinks
• CEBIS with an integrated PCMCIA disk drive
• Operator's seat on suspension
• Rear-view mirrors with electric drive