Antifriction plastic Zedex (Germany), replacement of bronze, Kyiv

We offer engineering plastics of the Zedex series: ZX-100K, ZX-324, ZX-410, ZX-530 and their modifications, which are produced at the factories of the German company Wolf Kunststoff-Gleitlager GmbH. As an official representative in Ukraine of a German manufacturer, we provide clients with partner discounts, technical advice on application and processing, and product passports.
The main positive properties of the ZEDEX brand family are:
- does not absorb moisture, which is different from polyamide PA.
- insignificant coefficients of dry friction and thermal expansion;
-high wear resistance, vibration resistance and damping in a wide range of working temperatures;
- the ability to absorb large abrasive particles and push out small metal in friction pairs - Zedex sleeve
- the ability to withstand high specific pressure and distribute local pressure caused by edge contact voltage over a larger area.
(//tractor-service.com)
Anti-friction plastic ZX-100K has high operational and technological properties, chemical resistance in weak solutions of acids and alkalis, can be used in dry friction joints where lubrication supply is difficult. From ZED-100K, sliding bearings, liners, and bushings are produced. The bushings of the running mechanism of rotary excavators are made of Zedex ZX-100K, which proves the durability and survivability of our plastic in heavily loaded working conditions.

ZX-100K is made of running nuts of forklift trucks, engine camshaft bushings, and gears. It is relevant to use the ZX-100K when working in pairs with worn shafts, worm gears, etc. a polymer sleeve, running nut or gear can be made with tension to compensate for wear and surface roughness.

The basic type ZX-100 and its modifications can serve as a replacement for traditional anti-friction bushing materials: bronze, graphite, babbitt, fluoroplastic - especially when working in chemically aggressive or polluted environments, under the influence of corrosion, high humidity.

We provide a selection of standard sizes of bars and bushings of Wolf ZX series polymeters: ZX-100K, ZX-324, ZX-410, ZX-530 and we make a cut according to your size, which allows you to spend money economically.

"TD Vektor" LLC and Wolf Kunststoff-Gleitlager GmbH have nothing to do with the material with a similar marking (ZX-100K, ZX-324, ZX-410, ZX-530) and produced in the Russian Federation. We are not responsible and do not accept claims on the quality of plastic produced in Russia.