Motoblock with active cutter Sadko Centaur Weima. Delivery, Ternopil region.

Can cultivate and plow at the same time.

The most effective type of equipment for processing your plot.
The principle of operation consists in the simultaneous operation of wheels and cutters, which allows for very high-quality cultivation of even previously uncultivated land.

We offer a choice of three models with an active cutter with a power of 7 hp.

Sadko M-400, Centaur MB 40-1 and WEIMA WMX 650.

WEIMA WMH 650 motoblock
Free address delivery in Ukraine(//tractor-service.com)
The WMX650 is equipped with an active cutter gearbox, on which sets of cutters are installed (both for continuous processing of 65 cm and for inter-row processing - 24 cm); pneumaticwheels 4.00-6 and narrow ground grips.

The walk-behind tractor is equipped with a gasoline engine WM170F-l with a gearbox, a belt clutch. The reducer of the wheel drive, like the reducer of the drive of the active milling cutter, is chain-type, fully collapsible. The gearbox has 2 forward and 2 reverse speeds. The active cutter also has 2 speeds. The drive to the milling cutter is carried out through a gear adapter, which can be unfolded, changing the gear ratio.

The steering wheel turns 180 degrees. Standard soil plugs will practically not leave traces on the treated soil. The motoblock can also work without an active cutter, in this case cutters are installed instead of wheels. It is also possible to install a hiller instead of thesupport wheel cutter. In this case, two operations are carried out at the same time: saving fuel and preserving moisture in the soil (the soil does not dry out during the period between milling and hilling).

The WMX650 motoblock is designed for full processing of 30-50 acres of land, but its main advantage is inter-row processing. WMX650 is the kind of equipment that will work in the garden from early spring to late autumn and will greatly facilitate your work. The processing quality will surprise even experienced gardeners. Practically all operations for changing and adjusting inventory are carried out without tools.

The motoblock is equipped with the usual "L"-shaped handles, due to a change in the configuration by the manufacturer.

Also, there is a lot of other equipment, cultivators, walk-behind tractors, attachments, adapters,sprayers, etc.