"HAZDA R71" rotary grain crusher (wheat, rye, barley grain) 1, 7 kW, Transcarpathian region.

Grain crusher "HAZDA R71" rotary (grainwheat, rye,barley, etc.) 1.7 kW

Description:
The Ukrainian manufacturer VGC LLC has created a powerful and damage-resistant unit.
Grain crusher "HAZDA R71" (wheat grain, rye, barley, etc.) is a high-quality Ukrainian device, easy to use and effective in processing agricultural crops. The engine of the device is electric, with an on/off button.
Two sieves are installed inside the crusher to adjust the size of the required feed fraction. With the correct setting, they will give exactly the "grind" that a specific animal needs.
An indispensable assistant in the household for preparing feed for pets and poultry. Grain crusher "GAZDA R71" consists of an engine, a body, a stand for a hopper and a hopper. The 1.7 kV electric motor, which is made only with a copper winding, is fixed on the body of the mill. At the bottom of the hopper there is an opening for feeding grain, the size of which is regulated by a latch. Grinding coarseness is regulated by shifting one sieve relative to another, and can be set from 2 to 7 mm.
Unlike other grain crushers, in which it is necessary to reinstall sieves with different hole sizes to change the grinding fraction, this grain crusher uses two sieves installed at the same time, and the grinding fraction is changed by moving the sieves relative to each other.

Features:
• Manufacturer: LLC "VHK"
• Manufacturer's address: Ukraine, Uzhhorod
• Type: Grain crusher
• Drive type: Electric motor (only with copper winding)(//tractor-service.com)
• Motor type: Single-phase
• Power consumption: 1.7 kW
• Nominal voltage: 220V
• Hopper volume: up to 10 l
• Number of sieves 2 pcs. The diameter of the holes is 7 mm. When shifting one sieve relative to another, it is exposed from 2 to 7 mm.
• Material of loading hopper: Plastic
• Shaft rotation frequency: 2800 rpm.
• Grain processing up to 170 kg/h
• Frequency: 50Hz
• Protection against overheating of the German company THERMIK GmbH
• Shredder: Cross-shaped rotor, the blades of which are made of ST 45 steel (high-quality carbon steel)
• The body of the crusher is reinforced.
• Dimensions: 405*280*515
• Weight: 13.1kg
• Warranty 12 months.