Husqvarna brush cutter 555FX
Husqvarna 555FX is our powerful brush cutter, designed for intensive work during a full shift and in difficult conditions. The engine with the patented X-Torq® technology provides increased torque in a wide range of revolutions, reduced content of harmful substances in the exhaust and fuel economy. The compact length of the rod and the gearbox of a special design, located at an angle of 24 degrees, facilitate directional felling in dense forest. Significantly reduced vibration level thanks to the effective lowVib® system. Comes complete with a Balance XT harness.
Technical characteristics:
Manufacturer: Husqvarna
Article number: 9666291-01
Engine: gasoline, 2-stroke
Working volume of the cylinder: 53.3 cm³
Power: 2.8\3.7 kW\hp.
Idle revolutions: 2800 rpm
Optimum revolutions of the engine with the cutting head: 9,000 rpm
Maximum revolutions of the power take-off shaft: 10,500 rpm
Starting system: manual starter
Engine cooling type: air
Cylinder diameter: 45 mm.
(//tractor-service.com)
Piston stroke: 33.5 mm.
Fuel consumption: 480 g/kW
Interelectrode gap: 0.5 mm.
Air gap of the ignition module: 0.3 mm.
Fuel tank volume: 1.1 l.
Gear ratio: 1.29
Gear position angle: 24 °
Cutting width with a knife: 225 mm.
The width of mowing with a fishing line: 400 mm.
Fishing line thickness: 3 mm.
Weight: 8.9 kg.
Noise level: 112 dB(A)
Sound pressure near the operator's ear: 103 dB(A)
Guaranteed sound power: 117 dB(A)
Dimensions (L x W x H): 148 x 304 x 200 mm.
The equivalent vibration level of the left handle: 2.1 m/s²
The equivalent vibration level of the right handle: 2.3 m/s²