Front loader Amkodor-371 with a load capacity of 7 tons and its modification – Amkodor-371-01 with a capacity of 6 tons is intended for loading bulk and lumpy materials into vehicles, performing earthmoving and transport work on soils of category I-III.
These powerful, high-performance machines have a rather attractive appearance. The loaders are equipped with a Cummins 6CTA 8.3-260 diesel engine with a power of 194 kW, axles and hydromechanical transmission from the company "ZF, hydraulic equipment from the companies Hydrocontrol, Danfoss, Sofima, which makes the machines quite reliable in operation. The hinges of the connections of the loading equipment, the frame, the balancing suspension of the bridge are equipped with a centralized lubrication system. The engine has an autonomous heater, which is designed to facilitate the start of the diesel engine at lower temperatures -12°С and automatic maintenance of the thermal condition of the diesel engine when it is turned off
The main distinguishing feature of the
Основной отличительной особенностью
Amkodor loader-371-01 is the ability to unload material up to a height of 3700 mm, i.e. to load semi-wagons, which is impossible when the basic model is working. This is provided by loading equipment with an extended boom.
ZF drive axles (multi-disc brakes in oil with hydraulic drive), 2-section hydrodistributor Hydrocontrol (Italy), Z-shaped scheme of loading equipment
Nominal load capacity, t 7.0
Capacity of the main bucket, m³ 3.8
Bucket width (along the cutting edge), mm 3190
The maximum unloading height of the bucket, mm 3125
Overturning load with folded half-frames (folding angle of half-frames ±37°) 140
Extraction force, kN 172
Minimum (overall) turning radius along the outer edge of the main bucket in the transport position, m 7.2
Engine Cummins 6CTA8.3-C260
Operating power of the engine (according to the documentation for the engine), kW 191
Availability of a device for starting the engine at negative temperatures Имеется
(//tractor-service.com)
Type of transmission Hydromechanical
Maximum speed, km/h
working (I gear) 0-5.6
transport (IV gear) 0-30.0
Size
tire, inch 23.5-25
Ground clearance, mm 410
Turning system Articulated-articulated frame
The folding angle of the articulated frame relative to the longitudinal axis of the loader is ±37°-2°
Overall dimensions, mm:
length with bucket in transport position 8900±100
width (by bucket) 3190
height (over the cabin roof) 3870
Operating mass, kg 21350
Warranty. Service. Minimum factory prices for products of the Amkodor brand from the official dealer of the Amkodor holding in Ukraine. Credit. Leasing.