Harrows Rotary Hoe 3m, 6m, 12m / WITH GOS.COMPENSATION 25%, 40%, Dnepropetrovsk region.

High quality rotary harrow!!! / Rotary Harrows Hoes in the Dnipro sowarehouse!!!
The rotary harrow (BMR) is intended for harrowing of crops of grain, fallow and technical crops in the pre-emergence and post-emergence period with the purpose of:
- Destruction of the surface crust on the soil, as well as its high-quality mulching.
- Soil loosening and air injection into it (the principle of aeration using micro-explosion technology to saturate the soil with nitrogen)
- Destruction of weeds at the stage of filamentous shoots. (Efficiency up to 100% at a speed of 15-20 km per hour)

OUR WEBSITE: http://BORONA.COM.UA

Principle of action:

The harrow has a hinged method of aggregation and is used with class 2 and 1.4 tractors.
When the tractor starts moving, the wheels also begin to turnwheels hoes, while their teeth sink into the soil to a depth of 3-5 cm, destroying the surface crust. Due to the special design of the tooth, when it comes out of the ground, a micro-explosion occurs, thanks to which air is pumped into the soil.
Nitrogen contained in the air enters the soil and is absorbed by plants, which contributes to their development.

This technology makes it possible to do without nitrogen fertilizers and switch to environmentally friendly herbicide-free cultivation.
In addition, this type of harrowing creates an excellent background for the primary development of the root and other systems of the plant, produces mulching of the surface layer of the earth and destroys the soil crust, while preserving moisture.

An important aspect when using a rotary harrow is the fact that damage to cultivated plants from its use is no more than 0.8-1%. For example, the damage from using other types of harrows is at least 10-15%.
(//tractor-service.com)
It is worth noting that when using rotary harrows, 95% to 100% of weeds are destroyed at the thread stage. It is also important that this type of technique is used at those stages of plant growth (corn 2-3 leaves), when it is impossible to use tooth harrows, which allows to achieve an additional positive effect.

Technical characteristics:

Working speed, km/h. 15-20
Working width of capture, m. - 5.8
Productivity, ha/h. - Up to 100
Processing depth, see 3-5
Mass, kg. 1200
Weight of one section, kg. 40
Overall dimensions:
Width, m. 5.8
Length, m. 0.95
Height, m. 0.9
It is aggregated with tractors, class - 1,4 and 2
Maintenance staff, person: 1 (tractor operator)
The method of aggregation is spring.

(Our site: http://borona.com.ua)