Conveyor with scales, Poltava region.

Conveyor type: horizontal, mobile.

Tape width: 500mm.

The tape is made of structural steel with mesh weaving, temperature resistant to + 160C.

The tape moves along rollers. To adjust the tension of the tape, tensioning mechanisms are provided.

The height from the floor to the working surface of the conveyor is 800mm with the possibility of adjusting the regulation by 50mm.

Drive and tension drums with a diameter of 159 mm are installed on self-centering bearings in a closed housing.

The drive with degree of protection IP 55 consists of a motor-reducer (Neri Motori, Italy) with a power of 1.1 kW.

The movement of the tape is controlled by the operator using sensors.

The conveyor is equipped with a sensor for automatic stop of the tape when the boxes reach the extreme point.(//tractor-service.com)

The material for making the conveyor frame is a bent sheet of structural steel with a thickness of 2 mm.

Rolgang with the following characteristics:

The length of the roller conveyor: 600 mm.

Roller width: 500 mm. 180

Ролики диаметром 42мм, межосевое расстояние 100 мм.

Each roller is equipped with two bearings.

The height of the roller conveyor: 800 mm.

The roller is equipped withscales for 50 kg.

The roller conveyor is equipped with a sensor that controls the presence of the box.