Rotary trailed combine harvester "ROS-2", Kiev region.

Rotary trailed combine harvester "ROSH-2" is intended for mowing green sown and natural grasses, corn and other silage crops up to 1.5 m high; at the same time grinds and loads crushed robostructural green fodder into vehicles. With the open casingthe auger machine mows and places grass in a swath on the ground or
mulches stems after harvest residues. If necessary, the harvester picks up grass from the swath, chops it and loads it into the trailer.
The knives of the forage harvester of the original design with a double-sided cutting edge reinforced by hard alloy, hingedly installed on the rotor, ensure optimal height and quality of cut, reliability and durability of the combine. The design of the scraper and silo provides additional grinding, intensive ejection and creates a directed stream of plant mass, thereby increasing the density of loading vehicles while reducing green forage losses. An extended silo with a double visor ensures safe operation when loading green mass into a parallel moving vehicle with a side height of up to 3.2 m or a two-axle trailer attached to the rear of the combine.(//tractor-service.com)
The design of the sleeper ensures the transfer from the tractor cab to the transport and working position of the combine, the convenience of transportation in a unit with atractor on general purpose roads and minimum dimensions when shipping to the consumer without disassembling the combine.
Complete setwith low-pressure tires allows cleaning of green mass on overmoistened soils without injuring
the root system of perennial herbs. The copying mechanism ensures complete harvesting of plant mass by copying the surface of the field relief.
Due to its high operational qualities, strength, reliability and versatility, the rotary harvester is effectively used in all fodder production areas, without resorting to the services of highly qualified specialists.