Milking machine Burenka 1 stainless steel 3000 rpm, Poltava region.

Milking machine apparatus Burenka-1
with all-stainless milking glasses and an aluminum cover.

It is intended for use at home, designed for servicing from 1 to 8 cows at a time and differs from the standard model in the quality of the milking equipment.

The milking unit is equipped with avacuum pump and one milking bucket with stainless cups, an aluminum lid and a standard 140 cm3 collector.

The vacuum unit is equipped with an electric motor at 3000 revolutions per minute, which makes it possible to use it both for milking one cow and for simultaneous milking of 2 cows if there is a second additional milking bucket, which can be purchased separately.

The main difference from other milking machines is the placement of the milking bucket separately from the vacuumpump, which allows you to take it even to another room.
The milking equipment is equipped with a reliable and simple two-stroke system that works in compression and decompression mode.

General information:

- Device type: stationary;
-Maximum productivity of 8 cows per time;
-One-time milking of 1 cow;
-Material of the milk tank: aluminum; 175
-Вместимость молочного бака 20 л.;
-Type of nipple cups: stainless steel;(//tractor-service.com)
-Milk tank cover: aluminum;
-Chassis design: wheeled trolley;

Technical characteristics:

-Vacuumdry pump plate-rotor type;
-Electric power 0.75 kW;
-Power supply: single-phase network 220V;
-Maximum vacuum pressure 0.06 mPa (60 kPa);
-Volume of pumped air at idle speed 220 l/min (7m3/hour);
- Shaft rotation speed 3000 rpm;

Overall dimensions: 194

-Длинна 72 см;
-Width 39 cm;
-Height 57 cm;
-Weight 28 kg.

Warranty 12 months (1 hour):
The warranty extends to a vacuum pump that was purchased complete with a milking bucket and equipment, used for its intended purpose and subject to compliance with all the rules for operating the electrical appliance.