Corn harvester Olymak Drago GT - no losses, AR Krym

The only reaper in the world that automatically adjusts the gap between the cutting strips.
Full harvest without losses.
We have been manufacturing since 1974 and deliver to Russia and the CIS.
The companyOlimac established world-famous industry scales due to its patented technologies.
Call or write to us, we will send a presentation of the harvesters, a price list with prices, and a commercial offer. The price is indicated for 8 rows, row spacing 70 cm. Rigid frame
- Automatically opening bars
- Especially long rollers
- Large corner screws
- Working angle of 18 degrees with hooks for adjustment.
- Bevel gear
- Reducer made of light casting
- Four sliding clutches
- Automated Plant 20,000 m2
- Varnish coating
- Built-indouble chopper
- It works without operator intervention.
- from 4 to 24 rows with a rigid and folding frame (according to your needs)
- distance from 50 to 80 cm (according to your needs)
The company Dragotek is the exclusive distributor of Olymak since 1994.

RELEASE BARS WITH AMORTIZATION
The initial separation bars are equipped with a special shock-absorbing device that absorbs shocks when the initials fall: The separation of the initials proceeds smoothly, which minimizes losses and eliminates the skipping of grains between the bars. ADVANTAGE: full harvest without losses.

RELEASE BARS, AUTOMATICALLY ADJUSTABLE
The span of the ripping strips is automatically adjusted and corresponds to different sizes of the stems. Self-regulation works independently of each row. The operator does not need to make any corrections. ADVANTAGE: full harvest without losses.

.SPECIALLY LONG FORMING REFINING ROLLERS
The forming refining rollers are especially long compared to conventional headers, thanks to which you can ensure speed with low revolutions, performing a smooth separation of corn cobs. ADVANTAGE: smooth opening of corn cobs, full harvest without losses.
(//tractor-service.com)
LARGER SCREWS AND LOW-PROFILE LAYOUT
DragoGT is equipped with a new large auger (Ø 500 mm, the largest in this field), which ensures a high speed of feeding lying and dry corn cobs, thus avoiding clogging and loss of kernels. Cylindrical gearing of the auger, which is located in an oil bath and does not require maintenance. Yes, you can use your harvester with maximum productivity. Side augers and a low-profile design allow a full harvest even in the case of low-growing corn cobs.
WORKING ANGLE 18º
In operation, the opening system, unlike other harvesters, makes a very small angle with the ground. Thanks to this special quality, the process of collecting lying stems is not problematic. Moreover, the small slope of the separating mechanism prevents corn cobs from jumping out of the unit.
ADJUSTING HOOKS: 18°
On each brand and variety of combines with DragoGT, it is possible to set the required working position 18, ensuring harvesting without losses. With the help of adjusting hooks, the optimal working position is adjusted regardless of the size of the combine wheels.
BEVEL GEAR: MORE POWER, LESS NOISE
DragoGT harvesters are equipped with bevel gears similar to automobiles, which allows, in general, to increase power and guarantees a low noise level compared to traditional gears used by all other brands of harvesters. These two exclusive features make your work more productive and less tiring.
LIGHT CAST REDUCER
The companyOlimac designed a reducer made of light casting, replaced the cast iron parts in the required places, thus achieving lightening of the structure, simultaneously increasing reliability. Such an optimal solution can only be offered by DragoGT.
FOUR SLIDING CLUTCHES FOR EACH ROW
Conventional harvesters have only one clutch, which is involved in different movements. DragoGT has four clutches for each row. These four safety clutches have different calibrations, each of which is designed for a specific movement. All this guarantees high power and safety.
Shredder - Scissors effect
Double cut, excellent cut - exclusive Olimac technologies
The Drago GT double chopper has two counter-rotating blades. They create a scissor effect, resulting in a double cut of the stems. This patented function, which has no analogues in the world, belongs exclusively to the Olimac company; it allows you to accelerate the biological decomposition of the material on the ground. The double chopper works economically - its power consumption is comparable to the power of a simple chopper.

A beautiful example of grinding.
Rotary knives of the chopper with minimal energy consumption grind corn stalks so that the field can be plowed immediately after harvesting.

Painting at the highest level
The fully automated varnishing process extends the service life of the paint, which is about 300% higher than the average. Olimac paint has an aesthetic shine and provides long-lasting corrosion protection.

9. Plant 20,000 m2
Hypertechnologies on 20,000 m²
Olimac has created an impressive complex of futuristic industrial culture, far-sighted innovations that allow harvesting work to be carried out absolutely cleanly. Qualities necessary for the global consumer.
Since the first corn harvesters were produced in 1954, the owner from the Carboni family has focused his attention on the development of a single product and developed a technologically exceptional proposition. Olimac is synonymous with high productivity, meeting high quality standards, excellent harvesting without losses in the shortest possible time.

Drago harvesters are used on all corn fields.
Dragotek - Exclusive distributor of Olimac since 1994.
In Europe, Africa, Asia, Australia, South America and Russia, Dragotec acts as an uncompromising leader in marketing and sales of Olimac products. Full control of after-sales service is also an integral part of the responsibilities: Dragotec specialists ensure the supply of spare parts, professionally perform maintenance and repair, and are also recognized as partners for the warranty period. Dragotec is a meeting place for Olimac clients.