The unit has two modes of operation: for chopping branches on logs with the diameter of these branches and for cutting logs when harvesting
firewood for heating. In the mode of crushing branches with a diameter of 10...50 mm, the material is manually fed into the guide cone. There, the branches are captured by knives located on 2 parallel, counter-rotating rolls - and cut into pieces up to 55...80 mm long. Through the outlet pipe - churochki is thrown out - down. In the cleaver mode: a piece with a length of 200...400 mm and a diameter of 100...250 mm is placed on the table and lightly pressed onto the screw cone. Due to the thread, starting from the tip of the cone, the screw is wound onto the cone, due to the screwing of the cone into it. As the cone is screwed into the barrel, the latter splits along the fibers into two parts. The use of a gasoline drive unit with a capacity of 6.5 horsepower allows its autonomous use: in any convenient place. Upon prior order, an electric three-phase 5.5 kW engine can be installed, which will limit the autonomy of use, but will simplify operation, if there is a network of the appropriate power. It is possible to make the unit under the drive of the power take-off shaft. The weight of the unit is up to 150 kg, overall dimensions are 120x95x137 cm. We teach how to work on the equipment. We provide assistance in delivery by transport agencies.http://www.garantagro.com