Fuel pellet production line, pellets 800-1000kg/hour, OGM-1, 5, Poltava region.

GK Bioekoprom offers a granulation line based on its own OGM granulator 1.5.
The OGM 1.5 granulator manufactured by Bioecoprom Group is designed to work in difficult conditions. This becomes possible thanks to a modernized pressing unit, a new dispenser made of stainless steel gears and shafts, and the use of special zinc-containing paints. Such constructive solutions allow you to successfully use the OGM-1.5 granulator when obtaining granules from difficult-to-granulate raw materials, including sawdust, shavings, straw, grain husks, peat,organic fertilizers etc.

Technical characteristics of OGM-1.5
(productivity 0.8 - 1.2 t/h. pellet diameter 6-12mm).

1 Granulator OGM 1.5 in complete completeness (without matrix and rollers). 75.4 kW
2 Mixer. 1.1 kW
3 Dispenser. 2.2 kW
4 The feeding auger is inclined. 2.2 kW
5 System of cyclones and pneumatic transport. 18 kW
6 Gateway dispensers with a motor-reducer. 3.3 kW
7 Noria. 1.5 kW
8Storage hopper with an auger. 4.0 kW
9 Cooler with a discharge table. 1.1 kW
10 Control panel.
11 A set of connections and pipes for the complete assembly of all systems and adjustment of the assembly.
Total: 120.00 kW
Composition of OGM-1,5 equipment.

1. The hopper-accumulator of raw materials is intended for the collection of crushed raw materials before granulation. It is located directly above the granulator. It is equipped with a stirrer that prevents raw materials from hanging, viewing windows, a ladder and fences.
Installed power, kW not more than 2.2
Electric motor speed, rpm 1500
Hopper volume, m3 3.5/6.0
Weight, kg 750/850

2. The noria of the cooling column is intended for the transportation of the produced granules to the cooling column.
Productivity, kg/hour not less than 2000/4000(//tractor-service.com)
Tape width, mm 150/175
Installed power, kW 1.5/2.2
Mass, kg 425/525

3. The cooling column is intended for continuous cooling of granules leaving the granulator. The produced granules, passing through the cooling column, cool down and gain strength. The cooling column is equipped with an ejector if it is necessary to sift dust from pellets.
Productivity, kg/hour 1500/2500
Cooling time, min 30
Installed power, kW 1.5
Mass, kg 430

4. Raw material reception and cooling cyclones are intended for centrifugal cleaning and capture of large unbroken particles, dust, and metal inclusions.
Throughput capacity, m3/time 3000
Diameter, mm 900
Height, mm 2050
Mass, kg 247

5. The control panel is intended for controlling the granulation process. It provides speed regulation, reverse, emergency shutdown, zero, final protection, protection of motors from short-circuit currents, from overload currents. The cabinet is made in the floor version with one-way service.

6. The OGM 1.5 granulator is intended forproduction of compound feed, as well as production of pellets from agricultural and forest industry waste.

Technical characteristics of OGM-1.5
Diameter of granules, mm 6-8
Productivity at Ø of pellets 6-8mm, kg/hour, not less than 800-1200
Number of rollers, pcs. 2
The number of installed el/motors is 3
Installed power, kW 75
Voltage of power circuits, V 380
Granulator body cast construction