Vesna 12 is a universal pneumatic seeder intended for precise sowing of calibrated, coated and ordinary seeds of sugar and fodder beets, soybeans, corn,
sunflower, castor beans, sorghum, fodder seeds beans, beans and other seeds close to them in size with the simultaneous introduction of granular mineral fertilizers separately from the seeds and rolling of the soil in the rows. A clod drain is installed in front of the working section, allowing to remove clods and a dry layer of soil from the sowing zone. The front section provides compaction and leveling of the soil in front of the coulter for better seeding. In the basic version, the seeder is produced with a set of discs for sowing beets with forty holes with a diameter of 2.2 mm. Coulters for sowing corn and
discs for sowing other crops can be supplied upon separate order. The Vesna 12 planter has a regular coulter for sowing beetroot seeds. An unloading hatch is provided for quick removal of seeds from the chamber of the seeding device. To order, they are equipped with a transport device that allows you to move it along general purpose roads. The sowing section was equipped with a 2-circuit drive of a new design. Screw section adjustment reduces the complexity of section adjustment. V-
образный каток ensures the pulling of moisture into the sowing area, pressing the seeds to the soil, leaving at the same time a non-compacted layer above the seed, which promotes rapid germination.
technical characteristics
The type of machine is mounted
Gripping width m 5.4 - 5.6
The number of lines pcs. 12
Row width mm 450, 600, 700, 900 450x900, 600x1200 Working speed km/h 2.5-9
Productivity ha/h 1.296-5.04
(//tractor-service.com)
Hopper capacity (total) - for seeds dm3 300 - for fertilizer dm3 288
Sowing norms - for seeds pc/p. m. 2-57 -
for fertilized kg/ha 50-350
The depth of seed sealing mm 20-60
Overall dimensions - in working position mm 2200x6330x1595 - in transport position mm 6982x2178x1722
Mass kg 1550
It is aggregated with tractors, more l. with. 80