Spare parts for planters UPS-8 Vesta-8, Kirovohrad region.

В наличии в наличие платья запчасти к сейламу UPS, Vesta, SUPN, SZ.
Wholesale prices.
The sowing device in the assembly of the sowing section 509.046.4960А
The plastic fat-screening device of increased capacity 509.046.5010-Т
Block of sprockets (5 stars, t=15.875) of the gear mechanism SUPA 00.1230
Block of sprockets (3 stars, t=15.875) of the gear mechanism SUPA 00.1240
Bolt of fastening of the support-drive hubwheel H 130.02.603
Plastic hopper instead of metal 509.046.4840/509.046.1170 509.046.5000
Shaft short shaft of gear mechanism L=263 509.046.6001-01
Hexagonal drive shaft of seeding devices right L=2500 509.046.6013
Shaft hexagonal drive of seeding devices left L=2700 509.046.6013-01
Lower fan shaft 509.046.6043
Fan rotor shaft 509.046.6045А
The driven shaft of the gear mechanism of the tukovys.apparatov drive 509.046.6051
The driving shaft of the transmission mechanism of the tukovys.apparatov drive 509.046.6052
Shaft long shaft of gear mechanism L=318 509.046.6068
The shaft of the seeding disc of the seeding device 509.046.668А
The upper shaft is assembled with a casing, a shaft with a bearing. with hub and rotor 509.046.2200Б-Т1
Cardan shaft of the fan drive (8 splines - 8 splines) 10.016.2000-02
Lower shaft in assembly of pulley and shaft 509.046.2200B-Т2
Fan with three sockets 509.046.2200B-07
Fixing screw of the fifth seed coulter 509.046.6102A
Screw of the special system of amortization of the section and fat coulter SSG 00.647
Insert under the screw SSG 00.647 of the damping mechanism in the fat coulter and sowing section SSG 00.121
Air-water (internal d=32 mm) 509.046.029
Air-water f75 l-600 (internal d=75 mm), L= 600 509.046.028-01
Air duct (internal d=75 mm), L= 750 509.046.028
Funnel (plastic) fat pipe H 042.13.000 H 042.01.009
Funnel (tip) metallic fat pipe H 042.13.000 H 042.13.010
The harrow of the seeding device 509.046.3090B
Sowing harrow. apparatus (metal) 509.046.4191
Bushing of the hub of the V-shaped rolling roller 45-6800054
Bushing for drive shafts 509.046.6013(-01) 509.046.1430
Drive wheel bushing d=62 509.046.6004
Drive wheel bushing d=78 509.046.6006
Hub bushing 509.046.109 UPS-8 509.046.8026
Bushing polyamide for bearing 180206 509.046.821
Powder metal sprocket sleeve 509.046.1280A KMH 105B
Roller bushing. wheels (polyamide) H 041.19.001
Marker hub sleeve large H 109.02.801
Marker hub sleeve small H 109.02.802
Bushing for the axle C 48.601-09 for the attachment of the leash H 126.04.011
Bearing sleeve 180206 for hexagonal shaft SKPA 00.623
Bushing of the lifting lever of the SSH marker 00.802
Hydraulic cylinder of the drive of markers Ts 75X200.3.1
Disk n = 40; d = 2.2 (Beets, sorghum) 509.046.4005
Disk n = 40; d = 3 (Candied beets) 509.046.4005-01
Disk n = 30; d = 3 (Sunflower, corn) 509.046.4005-02
Disk n = 30; d = 4 (Corn) 509.046.4005-03
Disk n = 30; d = 5.5 (Corn, clover, beans) 509.046.4005-04
Disc n = 60; d = 2.2 (Beets, sorghum) 509.046.4005-05
Disc n = 60; d = 4 (Soy) 509.046.4005-06
Disk n = 72; d = 4 (Soy) 509.046.4005-07
Disk n = 80; d = 4 (Soy) 509.046.4005-08
Disk n = 80; d = 1 (Cabbage, calibrated rapeseed, onion) 509.046.4005-09
Disc without holes 509.046.4005-10
Casting wheel disc (with legs) H 041.09.010-03
Casting wheel disc (without legs) H 041.09.402-01
Drive wheel disc H 041.19.401
Marker disc without hub H 154.00.419-04
The marker disc in the SHE assembly 04.120
Wrapper lion. UPS-12 (beet) 509.046.2370А
The wrapper is right. UPS-12 (beet) 509.046.2380А
Wrapper right UPS-8 SUPK 00.1090
Wrapper left UPS-8 SUPK 00.1090-01
Lock lock of the lid of the fat drying apparatus 509.046.2240, 509.046.2240-01 509.046.2280
Damper of the opening for unloading the seeding device 509.046.1400В
The right hook of the semi-automatic coupling 509.046.2360
The left hook of the semi-automatic coupling 509.046.2360-01
Sprocket of the counter-drive of the seeding device 509.046.1280А
Sprocket of the counter-drive of the seeding device 509.046.1280A-01
Sprocket (n=21, t=15,875) of the drive from the support-drive wheel 509.046.4073-01
Sprocket (n=15, t=15.875) of the transmission mechanism of the drive shaft of the ZTZU 00.120
Sprocket (n=21, t=15,875) of the gear mechanism of the driving shaft of the drive withZTZU wheels 00.120-01
Sprocket (n=13, t=15,875) of the gear mechanism of the driven shaft of ZTZU 00.120-02
Sprocket (n=23, t=15,875) of the mechanical gear drive of the ZTZU 00.120-03
Sprocket (n=26) drive gear mechanism of fat-screening apparatus ZTZU 00.120-04
Sprocket (n=13, t=15,875) drive, sections (drive shaft, 6 gears) SUPK 00.610-03
Sprocket (n=23, t=15,875) drive shafts 6 grain shafts 509.046.6013(-01) SUPK 00.610-04
Connecting link G.13568-75 chain S-PR-15,875-2300-2
Marker rope right 509.046.6075
Left marker rope 509.046.6075-01
The rope of the ZNS marker 65.601-43
Rolling roller of a new sample on rolling bearings UPS-8 509.046.5030-Т(//tractor-service.com)
Front roller complete with leash and bulldozer, replaced by 509.046.4750 (front) UPS-12 509.046.2930
Roller skating rink replaced by 509.046.4770 (rear) UPS-12 509.046.1380
Fan rotor casing 509.046.540-01
Rolling wheel of sowing section UPS-8 509.046.3800
Wheel withoutrubbers rolling sowing section without tire UPS-8 509.046.3800-4Т
The gear wheel (n=11) of the drive shaft of the mechanical gear of the KLT 02.104 fat-screening apparatus
Gear wheel (n=15) of the shaft of the driven mechanical gear of KLT 02.104-02 fat-sifting apparatus
Toothed wheel (n=18) of the intermediate mech-ma transmission of fat-screening devices KLT 02.104-04
Toothed wheel (n=35) of the drive of KLT 02.105 fat-screening apparatus
Wheel (disc and rim assembly) without hub (for 6.5x16 tire) 36-3101010-A2
Hub cap of the support-drive wheel H 130.02.408
Wheel hub cap H 041.09.405
Housing of the seeding device (under a plastic hopper). 509.046.016B-02
Marker hub housing H 109.02.101
The bracket of the V-shaped roller is replaced by 509.046.4780 509.046.4780
Bracket for fastening the sowing section to the frame beam 509.046.2050A
Bracket for fastening the fat coulter to the frame 509.046.2070
Bracket for fastening the coupling rod to the top. frame beam 509.046.2430А
Bracket for fastening the coupling rod to the top. frame beam 509.046.2430A-01
Front support rack bracket 509.046.2510
Semi-automatic coupling frame lifting bracket right 509.046.4320
Semi-automatic coupling frame lifting bracket left 509.046.4320-01
Cover of the sowing device 509.046.032
The cover of the device is high. for large sowing rates 509.046.081G
Hopper cover 509.046.0036 (509.046.5000) 509.046.0036
Cover of fat-screening device 509.046.2240-01 509.046.2220
Grain hopper cover metal 509.046.1170 509.046.487
Marker disc cover H 109.02.102
The curtain for adjusting the depth of seed sealing 509.046.1470А
Marker housing cuff 1.2-30X52-1
Cuff 1.2-55x80-3/1 2.2-55x80 support-drive wheels 1.2-55x80-3/1
Marker left 509.046.1860A-1T complete 509.046.1860A-1T
Marker right in assembly 509.046.1860А-2Т
Marker central part Central part of the marker 509.046.1860А-9Т
Oil seal M10x1 of the bracket of the drive wheel GOST 19853-74 1.2.Ц6ХР GOST19853-74
Mechanism of gears on counter-drive shafts of sowing sections 509.046.1720
Mechanism of gears on the counter-drive shafts of seeding sections 509.046.1720-01
The gear mechanism of the right-hand fat drive gear 509.046.2320
The mechanism of the gears of the drive of the tukov left 509.046.2320-01
Clutch for the lower fan shaft pulley 509.046.1560
Heel fixing pad in seed coulters 509.046.4211
Support and drive wheel, right, complete with bracket and grain. gearbox 509.046.1790
The left support and drive wheel complete with bracket and grain. reducer 509.046.1790-01
Here is the video of SUPA 00.016, counter. drive of the seeding device 509.046.6111
Here are the fasteners for beet wrappers 509.046.6135
Here is the tension roller SUPA 00.016-01 SUPA 00.668
Here is the SHE marker 04.130
Adapter for installation on the old body height. plastic device bunker 509.046.0052
The leash was replaced with 509.046.4460 UPS-12 509.046.4460
Leash SUPK 00.1100 app. wheels with adjustment bolt UPS-8 SUPK 00.1100
Bearing 205 /6205 marker housing
Bearing G.8882-75 180204 (6204.2К5) closed gear mechanism
Bearing G.8882-75 (6208) of the drive wheel 180208
Semi-automatic coupling coupling for the attachment of the seeder assembly 509.046.2400-Т
Crossbar (bar) of the semi-automatic coupling 509.046.1760
V-shaped roller bearing of a new model on rolling bearings 509.046.4770
Laying of the sowing apparatus polyamide 509.046.031
Chain tension roller spring 552.7.005
Spring marker spring SOU 00.300 552.7.006
Chain tension spring in gear mechanism 552.7.009
Amortization spring of fat coulter 552.7.010
Section damping spring 552.7.016
The fifth coulter 509.046.2820A (beet) 509.046.105А
Heel 509.046.106А opener 509.046.2840А (corn-sunflower) 509.046.106А
Fan drive belt TU 38.105.763-89 flat 18K-1400
Roller of tension section SKPA 00.028
Roller tension chain gears (polyamide) diam. internal 12 mm SOUP 00.016
Roller tension chain gears (polyamide) diam. internal 20 mm SUPA 00.016-01
Fan rotor 509.046.5330-Т
Lever for tipping the marker 509.046.1810
Seeding device resetter 509.046.1350А
The sowing section in the UPS-12 collection 509.046.4900
The sowing section in the UPS-8 assembly 509.046.5500-Т
Sowing section in the UPS-12 collection (Vesta) 509.046.5900
The sowing section in the collection UPS-8 (Vesta) 509.046.6100
Fat coulter attachment bracket 509.046.6028
Bracket for fastening the upper bracket of the semi-automatic coupling to the seeder frame 509.046.6072А
Bracket for fastening fat-seeding devices to the seeder frame 509.046.6073
Bracket for fastening the lower bracket of the semi-automatic coupling to the frame 509.046.6073-04
Bracket for fastening the sowing section to the frame beam 509.046.6073-07
Bracket OST 23.2.10-81 transport device 509.046.1850 2М20Х102Х120/40.56.Ц9ХР
Bracket OST 23.2.10-81 for fastening the frame of the feeding device 5М16Х175Х175/35.56.Ц9ХР
Clamp for fastening the fat pipe to the fat cells. of the STYA apparatus 01.607
Seed coulter (candle)