Press for the production of fuel briquettes from waste wood and straw, Kyiv region.

We offer a press for the production offuel briquettes from waste
wood and straw

Productivity:
a) Gran 500 500 - 800 kg/hour for chips
b) Gran 350 450 - 600 kg/hour for straw

The line includes:
- briquetting press - 1 pc.;
- filling tank with scraper - 1 pc.;
- briquette guides - 2 sets;
- control panel - 1 pc.

Technical description of the line for the production of fuel briquettes
- used for the production of briquettes without using binders(//tractor-service.com)
substances from wood waste (shavings, sawdust), as well as bread, from linen, cotton, and the like). Fraction of used raw materials, must be
рапсовой соломы и других отходов, заключающих в себе целлюлозу (отходы
из льна, хлопка, и тому подобное). Фракция используемого сырья, должна
tolerates 1 in 3 mm, and humidity 8-15%. Raw materials cannot be.
contaminated with such substances as: oils, greases, varnishes, paints, and
mineral pollution, such as sand and the like should not.
exceed 1.5% of the mass.

At the output, the briquette has a cylindrical shape with a diameter of 60 mm and at
the minimum length is 30 mm. Considering the nature of the workextruder, that is
cyclic pushing of portions of raw material, the briquette is the output.
strongly compressed segments from 4 to 6 mm long. In connection with this.
ego fracture between segments is allowed. The length of the briquette is 175
от 30 в 300 мм. Энергия что выделяется при сгорании брикета зависит от
of the raw material used and when using biomass is from 16 to 19.5
MJ/kg.