Primer elastomer ULTRAFLEX Ecobit DSTU B V.2.7-108-2001 liquid adhesive adhesive, Dnepropetrovsk region.

Grunt elastomeric ULTRAFLEX Ecobit DSTU B V.2.7-108-2001 liquid rubber - intended for the installation and repair of rolled and non-rolled roofs, as well as for carrying out work on waterproofing of concrete and reinforced concrete constructions in industrial and civil construction. The coating is applied in liquid form with a roller, brush or airless spraying equipment and forms a strong, elastic and completely waterproof membrane after curing. The coating has high resistance to the action of water, diluted acids, concentrated caustic solutions, and salts.

ULTRAFLEX-STANDARD Ecobit - intended for installation and repair of roll and non-roll roofs, as well as for waterproofing concrete and reinforced concrete constructions in industrial and civil construction.
The coating is applied in liquid form with a roller, brush or airless spraying equipment and forms a strong, elastic and completely waterproof membrane after curing. The coating has high resistance to the action of water, diluted acids, concentrated caustic solutions, and salts.

The coating is applied in liquid form with a roller, brush or airless spraying equipment and forms a strong, elastic and completely waterproof membrane after curing. The coating has high resistance to the action of water, diluted acids, concentrated caustic solutions, and salts.

• Resistance to chemical solutions and weather conditions
• High waterproofness.
• In contrast to the use of rolled roofing materials, it completely excludes leaks and does not carry an additional load on the ceiling.
• The possibility of installing and repairing roofs without removing or replacing the existing roofing carpet.
• Excellent adhesion to all materials.
• High strength and elasticity
• When using airless spraying equipment, it is possible to cover more than 1,000 m2 of roofing per shift.
• The durability of the coating according to the data of the testing laboratory is about 45 years.(//tractor-service.com)
• High repairability (in case of mechanical damage to the coating, it is quite easy and simple, without the use of any equipment, to apply the Ultraflex Standard coating to the damaged area) Costs for the subsequent repair of the roof are reduced by several times compared to roll materials
• Can be used in the temperature range from -20 °С to +40 °С

Basic physical and mechanical indicators

The name of the indicator Ed. measurements Norma
Density of cured vulcanizate kg/m3 900 -1200
Conditional strength at the moment of rupture MPa 0.5-1.0
Relative elongation at the moment of rupture, not less than % 400
The strength of the bond with concrete at tear MPa 0.45
The strength of the bond with the metal at tear MPa 0.45
Water resistance MPa 0.001
Heat resistance C +80
Temperature limit of fragility, not higher than -40
Resistance to aggressive media, mass change after exposure to 25% KOH solution for 24 hours at a temperature of plus (23±5) °C, no more: