Primer MBPPx Ecobit DSTU B V.2.7-108-2001 ( GOST 32870-2014 ) Primer bitumen-polymer for gluing rolled materials, used in cold condition
Primer bitumen-rubber polymer MBPPx Ecobit.
Primer MBPPx Ecobit - bituminous waterproofing mastic, consisting of bitumen, polymer and filler or without it, applied in a hot state
Field of application:
– Sealing of seams and cracks of cement and asphalt concrete covered roads.
– Protection of metal structures from corrosion and destruction due to atmospheric influences and under the influence of various aggressive media (salt, weakly acidic and weakly alkaline solutions).
– Waterproofing of internal and external surfaces of above-ground and underground structures and constructed of metal, concrete, reinforced concrete and other materials of any shape and size, including foundations, basements, bathrooms, trays, overpasses and other objects.
(//tractor-service.com)
Preparation:
Clean the surface on which the material will be applied, that is contaminated (dust, mud, petroleum products, oils, fats, etc.).
Clean metal surfaces from rust. Weakened areas of concrete surfaces must be removed to undamaged concrete. Removes all types of water from the surface (hail, frost, free water). Treat the surface with a primer or primer.
Heating:
Clean the mastic from the packaging. Divide the cleaned mastic into several parts and load it into the
boiler. Heat the mastic to a working temperature of 160–180 °C.
The time from when the mastic reaches working temperature to the end of its filling should not exceed 5 hours. It is categorically forbidden to heat mastic to boiling.
Work with mastic:
Mastic heated to working temperature must be thoroughly mixed before use. After drying, the primer layer is recommended to be applied to a dry, cleaned surface with any painting tool (brush, spatula) or by pouring from buckets or other containers and, if necessary, by subsequent leveling with the help of a plate fixed on a wooden handle.