Mastic MBS-X-60 Ecobit construction DSTU B V.2.7-108-2001 (GOST 30693-2000) 20 kg, Dnepropetrovsk region.

Mastic MBS-X-60 Ecobit building DSTU B V.2.7-108-2001 (GOST 30693-2000) is intended for gluing various roofing and waterproofing roll materials, as an adhesive composition for various building materials; for waterproofing concrete, reinforced concrete, metal, wooden and other building structures, including pipelines, protection of car bottoms, etc.

Mastic MBS-X-60 Ecobit construction DSTU B V.2.7-108-2001 (GOST 30693-2000)

Mastic MBS-X-60 Ecobit is intended for gluing various roofing and waterproofing roll materials, as gluing composition for various building materials; for waterproofing concrete, reinforced concrete, metal, wooden and other building structures, including pipelines, protection of car bottoms, etc.

Description

Bituminous mastic of cold hardening MBS-X-60 Ecobit is a suspension of fillers andmineral additives in a bitumen solution containing other additives for the purpose.

Application

Mastic MBS-X-60 Ecobit is intended for gluing various roofing and waterproofing roll materials, as gluing composition for various building materials; for waterproofing concrete, reinforced concrete, metal, wooden and other building structures, including pipelines, protection of car bottoms, etc.
Technical characteristics of the appearance Viscous liquid of black color with homogeneous inclusions of special. fillers
Drying time, 1 mm, at +20 °C, 24 hours
Consumption for waterproofing, kg/m2 2 — 3
Consumption for gluing, kg/m2 0.8 - 1
Minimum ambient temperature environment during mastic application, °C -10(//tractor-service.com)
Dry residue, wt. % 80±5
Density, kg/m2 900±50

Requirements for the base

The basis can be: old bitumen roofing, concrete and cement screeds, metal structures, various mineral bases. The base must be dry, clean, strong and free from substances that reduce adhesion. During the installation of waterproofing coatings, mineral bases are recommended to be primed with mastic diluted with white spirit, gason orgasoline in a ratio of 1:2

Application method

The mastic must be thoroughly mixed before use. The mastic is applied to the insulating surface by pouring with subsequent distribution on the surface with a rubber mop or applied with a fur roller or brush. If necessary, the mastic can be diluted with solvent, gasoline, white spirit. At sub-zero temperatures, the mastic is recommended to be heated to +30 +50 °C.

Packaging

Hermetic metal buckets of 10 kg, 20 kg.

Storage and transportation

The shelf life in intact factory packaging is 6 months.
The primer is transported by all types of covered transport in accordance with the rules of cargo transportation that apply to each type of transport.