МБР-Х-100 Ecobit Cold bitumen-rubber insulating mastic DSTU B V.2.7-108-2001 20 kg, Dnepropetrovsk region.

МБР-Х-100 Ecobit Cold bituminous-rubber insulating mastic DSTU B V.2.7-108-2001 Roll device roofing (fireless laying of roofing materials), covering car bottoms (anti-corrosion and anti-noise agent), waterproofing of steel and concrete structures, waterproofing of foundations, waterproofing of tunnels, waterproofing of basements, waterproofing of reinforced concrete structures

MBR-X-100 Ecobit Cold bitumen-rubber insulating mastic DSTU B V.2.7-108-2001

The device of roll roofs (fireless laying of roofing materials), covering of car bottoms (anti-corrosion and anti-noise agent), waterproofing of steel and concrete structures, waterproofing of foundations, waterproofing of tunnels, waterproofing of basements, waterproofing of reinforced concrete structures

It is a multicomponent mass consisting of petroleum bitumen, fillers, plasticizer and solvent.
Depending on the softening temperature, mastics are divided into brands: MBR-X-65 Ecobit; ICBM-X-75 Ecobit; ICBM-X-90 Ecobit; ICBM-X-100 Ecobit. Mastic is packed in metal or plastic sealed containers (closedbarrels, flasks). The volume of filling of the container is not more than 90%. Storage of mastic - in a closed room, provided with supply and exhaust ventilation. It must be protected from moisture and direct sunlight.

Fields of application:
(//tractor-service.com)
roll roofing device (fireless laying of roofing materials)
coating of car bottoms (anti-corrosion and anti-noise agent)
waterproofing of steel and concrete structures
waterproofing of foundations
waterproofing of tunnels
waterproofing of basements
waterproofing of reinforced concrete structures

Method of application:

Before use, the mastic must be thoroughly mixed, if necessary, diluted with a solvent (gasoline, nefras, solvent, toluene) in the required mass ratio and thoroughly mixed. The mastic is recommended to be applied to a dry, cleaned surface with any painting tool (brush, roller, spatula) by dipping, gaining a layer of the required thickness in several stages with inter-layer drying for 1-3 hours. It can also be applied with a pneumatic or airless sprayer. The consumption of mastic for priming concrete bases and for laying roofing materials is 0.8-1.2 kg/m2.m. For anti-corrosion protection of metal surfaces 0.3-0.9 kg/m2.
Warranty period of storage — 12 months from the date of manufacture.