Reservoir 5000l double-walled for diesel fuel Metria, Kyiv

Metria 5000l double-wall tank fordiesel fuel (Poland) - UAH 160,000

Turnkey mini gas station UAH 197,000 :

METRIA 5000l diesel fuel tank with lockable door (lockable housing prevents unauthorized access to equipment) [ UAH 160,000 ],
The best version of the configuration Mini gas station 220V 56l/min with a PANTHER 56 pump, with an electronic meter, a water separator filter, a coarse filter PIUSI Italy [ UAH 37,000 ],
with a pump 75 l/min (for refueling trucks) [ UAH 40,000 ] is

Turnkey mini gas station with diesel fuel dispensing and accounting control system (UAH 188,000):

METRIA 5000L tank for diesel fuel (Poland) with a lockable door (the lockable housing prevents unauthorized access to the equipment) [ UAH 129,000 ],
Mini gas station 220 V 56 l/min with a diesel fuel dispensing and accounting control system (chips, limits, balances, reports) [ UAH 59,000 ] ,
with pump 75 l/min (for refueling trucks) [ UAH 61,000 ]

The METRIA tank made of double-walled shockproof polyethylene is intended for the storage and distribution of diesel fuel and oils.

All tanks produced by METRIA are rotomolded (one part) and have no joints, seams or gluing.

The stationary fuel tank Eko Fuel Tank with a volume of 5000 l for diesel fuel is intended for storage and on-site filling of diesel fuel and oils classified as flammable liquids with fire hazard class III, i.e. petroleum products with a flash point above 55°C, including diesel fuel.
The tank is manufactured in accordance with the PN-EN 13341:2005+A1:2011 standard under the supervision of the Department of Technical Supervision (UDT). The tank is made in the form of a self-supporting double-walled structure made of UV-stabilized polyethylene PE-HD.
A hermetic filling cabinet (made of PE-HD) with doors that can be locked with two locks is installed next to the external tank.
The cabinet houses the bottling equipment and monitoring systems.

Complete device with distribution system includes:
1. Double-walled tank with distribution cabinet (protected by two locks).
2. Distribution system consisting of:pump, flow meter, priming gun, fine filter, sleeve.(//tractor-service.com)
3. Monitoring system consisting of:
a sensor that monitors the interluminal space (leak control),
fuel level probe.
transmitter interacting with sensor and probe
receiver with display
4. Maximum level sensor. The device consists of a probe located at the top of the inner tank and a plug that connects to a system that signals when the maximum level is exceeded or automatically shuts off the unloading pump on the tanker. The device protects the tank of the portable dispenser from overflowing and overflowing during unloading.
5. Unscrew the ventilation hole in the inner tank.
6. Inspection cover in 4 inch inner tank.
7. Inspection cover in outer tank, 16 inches.
8. The two-inch nozzle ensures a tight connection with the pressure tank.
9. Grounding is carried out outside the distributor housing.

Each double-wall tank is equipped with standard fittings in accordance with the requirements of the standard:

protection against overflow of the GOK tank
air release valve
a probe that monitors the space between the shells (signaling a leak)
Euroconnector VK 50
The complete set may differ depending on the purchased version of the eco-fuel tank.

High-quality polyethylene, from which the tanks are made, and the most modern production technologies provide reliable protection against temperature changes.
Long-lasting: they do not change color, do not crack, do not corrode, are resistant to sunlight and ultraviolet rays.

The tank is installed on the street, on a flat surface.
The tank must touch the soil surface tightly and stand vertically.
Before installing the tank, the surface must be thoroughly cleaned.
To protect against mechanical damage, the tank must be transported empty and with attached transport belts.