Tegeron bituminous ECOBIT rubber-bitumen mastic bucket 20 kg, Dnepropetrovsk region.

Tegeron bitumen Ecobit rubber-bitumen mastic DSTU B V.2.7-106-2001 It is a waterproofing sealing mastic made on the basis of butyl rubber, bitumen and other technologicaladditives.

It is a waterproofing sealing mastic made on the basis of butyl rubber, bitumen and other technological additives.

Purpose

- applying a primer layer with subsequent gluing of roofing roll (ruberoid) coverings (using a gas burner);

- waterproofing of foundation surfaces, walls, plastered surfaces;

Properties

- is a thick mass ready for use, which at

needs must be mixed;

- easily succumbs to the pressure of the tool used;
(//tractor-service.com)
- has good adhesion to horizontal and vertical surfaces

Application

The surface must be cleaned of loose cracks, cracks, dirt and dust. Mastic is applied to a dry surface with a roller, brush, spatula, in a layer of at least 1 mm at an ambient temperature of at least 50 C.

During roofing waterproofing works, the surface must be cleaned of weakly stable, collapsible coating elements, dirt, dust, grease and other contaminants. Mastic is applied to the surface with a brush, spatula, roller in a layer of at least 1 mm at an ambient temperature of at least 50 C.

Consumption of mastic is 0.8 — 1.2 kg/m2. The drying time of each 1 mm thick layer depends on the temperature of the environment and ranges from 1 to 24 hours. If the thickness of the layer increases, the drying time may increase.

To increase the stickiness of the mastic and ease of work, in the cold season, it is recommended to pre-heat the mastic in ametal container on a closed fire to 500C.

Storage

Keep as far as possible from fire and heating devices.

Packaging

Mastic is packaged in containers with a capacity of 10 kg to 45 kg.